1/2 inch torque wrench
Torque wrench push-through square drive
TRQWRNCH-PSHTHRG-1/2IN-(60-300NM)
Register now and access more than 2,000 products
- Accuracy of ± 3 % to the set value
- Simple and precise adjustment by turning the handle
- Switchover and/or push-through square drive
- Scaling in both newton metres (Nm) and pound-force feet (lbf·ft)
- Audible and tangible perception of torque triggering prevents over-tightening of bolts
- Anti-slip 2-component handle
- With calibration certificate
Torque wrenches are precision tools that must be checked at regular intervals with suitable measuring equipment and adjusted if necessary. We recommend annual calibration by our Master Service.
Datasheets(X)
After use, relax spring and set to lowest value.
 | |
Tip size | 1/2 inch |
Min./max. torque measuring range | 60-300 Nm |
Min./max. torque measuring range (inches) | 45-220 lbf.ft |
Suitable for right-hand tightening | Yes |
Suitable for left-hand tightening | Yes |
Scale value torque | 5 Nm |
ISO | DIN EN ISO 6789-1:2017 |
Length (L1) | 570 mm |
Length of lever (L2) | 550 mm |
Ratchet head height (B1) | 22 mm |
Ratchet head height with square (B2) | 45 mm |
Handle diameter (D1) | 37 mm |
Last viewed
Split pin DIN 94, zinc-plated steel, blue passivated (A2K)
Silicone fluid silicone spray
Tyre pressure monitoring system, tool set For the professional installation of tyre pressure monitoring sensors
TIME-SERT® screw-in tool
Hand cartridge gun high-quality
Protective wax
Adhesive lubricant HHS 2000®
Window seal
Plus Quadro-L Vario hammer drill bit
Hammer drill bit Plus Duo-S