Welcome to Würth Sri Lanka For trade customers only

Adhesive lubricant HHS® 2000

Adhesive lubricant, HHS 2000
ADHLUB-HHS2000-500ML
HHS2000

Art.-no. 0893106

Prices for customers after login

Adhesive lubricant HHS® 2000

Art.-no. 0893106

Prices for customers after login

Quantity

PU

Exclusively for trade customers

Register now and access more than 2,000 products

Partly synthetic oil that is extremely resistant to high pressures
  • Eliminates squeaks and creaks and has excellent flow and penetration performance, as well as good corrosion protection.

  • Highly adhesive lubricant that is not spun away when used on turning and rotating parts

  • Compatible with O-rings/X-rings and plastics. Neutral behaviour on painted substrates.

  • Resistant to splash water and salt water, weak acids and bases

  • Free from silicone, resin and acids
Notice

Resistance to high pressure loads


The HHS 2000 lubricating film remains active and does not tear off despite the high pressure load and shearing motion of the basic body. Reliably separates the counterpart-body from the basic body and thus ensures optimum wear protection at higher pressure loads.

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Application area

Extremely high-pressure-resistant partially synthetic oil for universal lubrication and high compressive stress

Instructions

Carefully and thoroughly pre-clean lubricating points with HHS Clean art. No. 089310610 before each application. Shake the can before use, spray the parts and allow to work briefly. Clean the spray nozzle after use by holding the can upside down and spraying until all residues have been expelled.

Chemical basis

Hydrocarbon

Oil basis

Mineral oil

Colour

Yellowish

Smell/fragrance

Oil

Density

0.742 g/cm³

Density conditions

at 20°C

Min. temperature conditions

-25 °C

Max. temperature conditions

180 °C

Max. temperature resistance

200 °C

Min. flashing point of active ingredient

300 °C

Kinematic oil basis viscosity

1500 cSt

Silicone-free

Yes

Acid-free

Yes

Resin-free

Yes

AOX-free

Yes

Resistance against

Salt water
Weak lyes
Weak acids
Splash

Contents

500 ml

Container

Can

Shelf life from production

24 Month

Suitable glove:

 
Product
Description
Nitrile chemical protective glove
Nitrile chemical protective glove
Description:
Permeation level: 5
Cotton velour lining
Nitrile chemical protective glove, heavy-duty
Nitrile chemical protective glove, heavy-duty
Description:
Permeation level: 6
Long, heavy-duty design
Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.
Measured breakthrough time
Permeation level
< 10 min
0
≥ 10 min
1
≥ 30 min
2
≥ 60 min
3
≥ 120 min
4
≥ 240 min
5
≥ 480 min
6

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.
Art.-no. Cust. Mat. No.

Hazardous Material

Product information

Würth Catalogue

Catalogue page as PDF  | 

Datasheets()

Datasheets ()

CAD data  | 

Certificates/Documents

 | 

 | 

Technical information