Adhesive remover spray
Adhesive removal spray
ADHREM-150ML
Register now and access more than 2,000 products
Special product for loosening adhesion in indoor and outdoor use on vehicles, motor homes, campers, on technical equipment and on leisure items.
Check rubber and plastics for material compatibility.
The usage instructions are recommendations based on the tests we have conducted and are based on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.
Special product for loosening bondings in indoor and outdoor use on vehicles, motor homes, campers, on technical equipment and on leisure goods.
Use a plastic wedge to slightly lift the hot-melt adhesive on a certain area. Spray the adhesive remover specifically into the gap of the hardened hot-melt adhesive and let it take effect briefly. The adhesive remover spreads into the gaps and loosens the adhesive residue from the surface. The adhesive residue is removed in one piece from the surface in a matter of seconds. Therefore, there is no need for a time-consuming removal process involving a hair-dryer, spatula and cleaner.
Contents | 150 ml |
Colour | Colourless |
Chemical basis | Propanediol |
Density/conditions | 0.69 g/cm³ / at 20°C |
Shelf life from production | 24 Month |
Datasheets (0)
Certificates/ Documents (0)
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!
Last viewed
1/2 inch socket wrench insert, metric
VDE screwdriver, PZ recessed head
Hammer drill bit Plus Duo-S
2-CUTTER SDS-PLUS HAMMER DRILL BITS Red Stripe
Twist drill bit HSS DIN 338 type RN 118°
Lacquer coating system
Twist drill bit HSS DIN 338 type RN 130°
PH screwdriver with hexagon shank
Compressed-air filter / Regulator Semi-automatic
Countersunk tapping screw shape C with H recessed head DIN 7982, A4 stainless steel, plain