Juniorfix pneumatic application gun
Pneumatic application gun, Juniorfix
Register now and access more than 2,000 products
Easy to work with
Lightweight, compact and ergonomic design
Rotary pressure controller on handle for slow and fast extrusion
Additional fine regulation of the flow speed via trigger.
Damper on quick-trigger valve
Protection of e.g. air supply components and simple cleaning
Fully enclosed housing
The average consumption for pneumatic application guns is approx. 7.2 litres/minute.
Caution: The maximum working pressure for applying sealants is 6 bar.
The usage instructions are recommendations based on the tests we have conducted and based on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.
310 ml cartridge
Weight of machine
Max. operating pressure
Plus disposal costs -,-- per selected packing unitCust. Mat. No.
Gravel throw and underbody protection
TX bit C 8.0 (5/16 inch) with hole
Maintenance set 693
Circlip pliers, shape A for shaft circlips
Precision feeler gauge
Cutting disc for stainless steel Basic
Maintenance set 7 pieces
Compressed-air filter / Regulator Semi-automatic
1/2 inch ratchet With turntable switching