Stone chipping and corrosion protection Aqua
Gravel guard and corrosion protection AQUA
GRVLGUA-GREY-1LTR
Register now and access more than 2,000 products
- Can be painted after approx. 24 hours with all paint systems, especially with water-based paints
- Guarantees clean, mist-free operation
- No run-off at vertical points
- Resistant and readily grindable after drying
- Suitable for furnace drying at up to 60°C
Do not spray on joints, engines, gears and brake systems. Protect from frost! Store between 10°C and 30°C.
The usage instructions are recommendations based on the tests we have conducted and based on our experience; carry out your own tests before each application. We do not assume any liability for a specific application result due to the large number of applications and storage/processing conditions. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service, or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and carry out further development.
Datasheets(X)
For repair and/or restoration of the original structure and for protection against stone chips and corrosion in all visible areas, e.g. front and rear valances, side skirts, etc. Highly suitable as anti-drone mass for indoors, e.g. doors, engine and luggage compartment.
Shake can well before use. The substrate must be dry and free of rust, dirt and grease. Old coating compounds to be removed. For processing with spray gun, art. no. 0891 106 3 or 0891 110 640. Optimum spraying distance: 30 cm. Working pressure: 3 – 6 bar.
Chemical basis | Acrylate |
Contents | 1000 ml |
Weight of content | 1220 g |
Colour | Grey |
Max. processing temperature | 60 °C |
Min./max. processing temperature /conditions | 15 to 60 °C / at 20°C |
Conditions for through drying | at 20°C |
Max. pressure | 6 bar |
Max. temperature conditions | 35 °C |
Min./max. temperature conditions | 15 to 35 °C |
Min. pressure | 3 bar |
Min./max. spraying distance | 30-40 cm |
Can be varnished after | 24 h |
Drying time/conditions | 48 h / at 20°C |
Conditions for drying time | at 20°C |
Density/conditions | 1.22 g/cm³ / at 25°C |
Min./max. temperature resistance | -10 to 80 °C |
Shelf life from production/conditions | 18 Month / at 10°C to 30°C |
Conditions to maintain shelf life from production | at 10°C to 30°C |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!
Last viewed
Hook and loop support plate
Acetate silicone Anti fungus
Acetate silicone Anti fungus
Sweat band For automatic welding helmets
Drilling screw, hexagon head with sealing washer pias®
Hammer drill H 24-MLS
Thread die HSS DIN EN 22568 for metric ISO fine threads
Brake cleaner
Slotted bit
O-ring, metric