Brake fluid DOT 3
Brake fluid DOT 3
BRKFLUD-DOT3-5LTR
Register now and access more than 2,000 products
Excellent resisting gas block performance
Ensure the brake safety under high temperature.
Excellent fluidity at low temperature
-40 oC Kinematics viscosity ≦1500 mm2/s
Outstanding corrosion protection
Excellent performance of resisting metal causticity.
Compatible with rubber
Complies with specification SAE J1703; FMVSS116 DOT3；ISO4925and GB12981-2012.
- The brake fluid is easy to absorb moisture from the air, therefore the cap of bottles must be screw down after using it.
- The brake fluid can erode the paint of automobiles, therefore the brake fluid do not drop on it and must be wipe immediately if dropping occur.
- Stored it in the location of avoiding sunlight 、cool and dryness.
Datasheets(X)
Contents | 5 l |
Colour | Light yellow |
Chemical basis | Polyglycol ether |
Shelf life from production | 36 Month |
Min. wet boiling point | 145 °C |
Min. dry boiling point | 245 °C |
Density | 1.022 g/cm³ |
Density conditions | at 23°C |
pH value | 9.4 |
Last viewed
Pan head tapping screw, C shape with H recessed head DIN 7981, A4 stainless steel, shape C, with tip
1/4 inch socket wrenches Assortment of 33 pieces
Masking tape Soft Mask easy
Tool bag Compact
1/4 inch bit holder, magnetic
Daisy disc
Application gun WIT
Mudguard pincers
3/8 inch impact socket wrench insert hexagon, metric, short
Pneumatic impact screwdriver DSS 1/2'' Standard