Cutting disc for stainless steel Basic
Cutting disc for stainless steel basic
CUTDISC-GREEN-A2-SR-TH1,0-BR16,0-D105MM
Register now and access more than 2,000 products
- Synthetic resin-bonded, fibre-reinforced standard cutting discs
- High degree of resistance to breakage
- Free of iron, chlorine and sulphur (≤ 0.1%)
Storage: Dry, at 20°C room temperature. Always wear appropriate protective clothing during operation. Always use an appropriate protective cover when performing cutting work. Only use undamaged discs. Do not jam/tilt the discs during cutting — increased risk of breakage! Ensure proper contact pressure. Always clamp cutting discs (straight design) with the metal ring toward the machine.
Complies with the most stringent safety requirements of European Standard EN 12413.
Datasheets(X)
Cutting of metal sheets, pipes, profiles, armouring iron etc.
Versatility (points system) | 2 of 4 points |
Service life (points system) | 2 of 4 points |
Cutting ability (point system) | 2 of 4 points |
Cut quality (point system) | 2 of 4 points |
Diameter | 105 mm |
Thickness | 1 mm |
Drill hole | 16 mm |
Design | Straight |
Max. rotation speed | 14550 1/min |
Max. circumferential speed | 80 m/s |
Last viewed
Cylinder saw, HSS bimetal Longlife & Speed HSCo8
Silicone spray
Pan head tapping screw, C shape with H recessed head DIN 7981, A4 stainless steel, shape C, with tip
Metric double open-end wrench DIN 3110/ISO 1085
Car Windscreen Wiper Conventional Standard
Silicone remover
2-CUTTER SDS-PLUS HAMMER DRILL BITS Red Stripe
PH laser tip screwdriver With hexagon shank and hex bolster
Dry sanding disc 15-hole
Plastic frame anchor W-FRA 10 steel zinc plated