Circlip pliers, shape C For bore circlips
DIN 5256 shape C drill hole circlip
CRCLIPPLRS-C-(8-13MM)
Register now and access more than 2,000 products
Standard: DIN 5256
Handle: Plastic-coated
Guarantees a secure grip, prevents slippage
Tip from compressed spring steel
Optimised stability, even with seized rings
Inserted tips
Offers maximum strength when loosening seized rings and allows rings to be installed with minimal distortion.
Screwed and mounted joint
High precision and optimised movement.
Large locating faces
Rings mounted without torsion.
Pliers head
Narrow design for optimum access to workpiece, including in hard-to-reach spots.
Datasheets(X)
Circlip pliers for inner rings.
 | |
Length (L1) | 140 mm |
Min./max. grip range | 8-13 mm |
Jaws length (L2) | 39 mm |
Material | Steel |
Diameter of tenon (D1) | 0.9 mm |
Form | C |
Last viewed
Sanding disc Useit Superpad vehicle
Triangular file DIN 7261, shape C
Circlip pliers, shape A for shaft circlips
Twist Drill bit HSCO DIN 338 TYPE RN
Cylinder saw, HSS bimetal Longlife & Speed HSCo8
1/2 inch impact socket wrench insert DIN 3121/ISO 1174
Screw and bearing locking DOS rail
Hand tap set HSS, DIN 352 3 pieces
Hammer drill bit Plus Duo-S Vario
Acetate silicone Anti fungus