Clamping pin/clamping sleeve, slotted, heavy-duty design ISO 8752 spring steel plain
ISO 8752 steel plain
SPGPIN-ISO8752-3,5X20
Register now and access more than 2,000 products
- Securing elements, used in a similar way to grooved pins
- For use as sleeves for bolts/screws, predominantly in applications where significant shearing forces occur
- Strain on bolts and screws is relieved, allowing smaller sizes to be used
- 0.2–0.5 mm oversize compared with the nominal diameter guarantees a secure, firm fit
- Tapered end makes it easier to insert the part into the hole
- Pins can be removed again without causing damage
The hole diameter is the same as the nominal diameter (tolerance 12 H).
Datasheets(X)
CAD data (available after login)
 | |
Nominal diameter (d1) | 3.5 mm |
Length (l1) | 20 mm |
Material | Spring steel |
Surface | Plain |
RoHS-compliant | Yes |
Design | Heavy-duty design |
Standards | ISO 8752 |
Last viewed
Twist drill bit HSS DIN 338 type RN 130°
Engine sealing compound Silicone Special 250
Dry sanding disc Price & Performance
Countersunk tapping screw shape C with H recessed head DIN 7982, A2 stainless steel, with tip
Wet and dry vacuum cleaner ISS 35-S AUTOMATIC
MFD-S multi-purpose drill bit with straight shank
Wire cup brush Braided steel with M14 connecting thread
Engine flush and cleaner For use in all petrol and diesel engines
Threaded rod DIN 976-1 (shape A) with standard metric ISO thread, A4 stainless steel
O-ring, metric