REPLAST<SUP>®</SUP> Easy Fast plastic adhesive - ADH-PLA-2C-FAST-50ML

REPLAST^® Easy Fast plastic adhesive

Name: REPLAST ® Easy Fast plastic adhesive
Brand: Würth
SKU: 08935003

Plastic adhesive REPLASTeasy Fast
ADH-PLA-2C-FAST-50ML

Art.-no. 08935003

EAN 4046778846392

All versions

Prices for customers after login

REPLAST^® Easy Fast plastic adhesive

Art.-no. 08935003

Prices for customers after login

Quantity

x 6 pcs

Exclusively for trade customers

Login/Register
Call customer service: +94 112 894930

For REPLAST^® Easy plastic repair system

An adhesive for virtually every type of plastic

Simple handling of various adhesive types

Can be used for repairs and structural bonding

Special positive mixer

Optimal mixing of the smallest volumes

Little adhesive wastage

Fast-curing

Further processing, such as sanding, possible after a short time

Outstanding resistance to chemicals

Resistant to a range of liquids, such as petrol, many lubricating oils and ethyl acetate

Solvent-free

Notice

In some cases, adhesion issues may be encountered due to the coatings and release agents used in the plastic production process. Not suitable for PE (polyethylene), PP (polypropylene) or PTFE (polytetrafluoroethylene) plastics. Check material compatibility on a non-visible area if necessary.

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications as well as storage and usage conditions, we do not assume any liability for a specific application result. Any technical information or advice provided by our free customer service shall be provided to the exclusion of any liability, unless the advice or information is part of our contractually agreed scope of services or the advisor was acting wilfully. We ensure the consistent quality of our products. We reserve the right to make technical changes and further developments to our products.

Product information

Würth Catalogue

Datasheets(X)

Certificates/ Documents

Application area

Cars:

Spoilers, radiator grills, panel clips, bumpers, brackets on headlights and radiators etc.

Trucks and buses:

Skirt panels, bumpers, air intake pipes, wheel arches etc.

Motorbikes:

All panelling

Instructions

The substrate must be capable of bearing loads and must be clean, dry and free from grease and rust. Old adhesive residues must also be removed. To do so, clean the surface with the plastic cleaner and apply the primer. The flash-off time must be observed. Discard some adhesive before screwing on the mixing nozzle. The first 2 cm of adhesive dispensed from the mixing nozzle should also be discarded. When applying the adhesive, the mixer should remain in the adhesive to prevent bubbles forming. Observe the work instructions.

Contents	50 ml
Chemical basis	Two-component polyurethane
Processing time	1.5 min
Colour	Black
Density	1.225 g/cm³
Min. initial strength	10 min
Min./max. processing temperature	15 to 25 °C
Min./max. temperature resistance	-30 to +100 °C
Silicone-free	Yes
Shore D hardness	79
Can be sanded after	10 min
Sanding conditions	23°C

REPLAST^® Easy Fast plastic adhesive including:

2 x

Static mixing tube

STATSTATMIXTUB-ADH-2C

Description: For 2C plastic adhesive

Quantity: 2 x

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with v

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).

Required accessory:

Product

Description

Quantity

Price
/PU