Cutting disc for steel
Cutting disc for steel
CUTDISC-BLUE-ST-SR-TH3,0-BR22,2-D180MM
Register now and access more than 2,000 products
- Synthetic resin-bonded, fibrous material-reinforced standard cutting disc
- For free-hand cutting with electric or pneumatic angle grinders
- High break resistance
- Max. circumferential speed 80 m/s
- Storage: Dry, at 20°C room temperature
- Work only with appropriate protective clothing.
- Always use an appropriate protective hood when performing cutting work.
- Only use undamaged discs.
- Do not jam/tilt the discs during cutting. Increased risk of breakage!
- Ensure correct contact pressure.
- Always clamp cutting discs (straight design) with the metal ring facing towards the machine.
Meets the maximum safety requirements in accordance with the EN 12413 European standard.
Datasheets(X)
General structural steels, high-strength structural steels, constructional steels, tool steels, hardened steels
Cutting solid materials, pipes, profiles and metal sheets
Versatility (points system) | 1 of 4 points |
Service life (points system) | 2 of 4 points |
Cutting ability (point system) | 1 of 4 points |
Handling/user-friendliness (point system) | 2 of 4 points |
Cut quality (point system) | 2 of 4 points |
Diameter | 180 mm |
Thickness | 3.0 mm |
Drill hole | 22.23 mm |
Design | Straight |
Max. rotation speed | 8500 rpm |
Max. circumferential speed | 80 m/s |
Last viewed
Hose clamp set, strap width: 12 mm 111 pieces
Countersunk tapping screw shape C with H recessed head DIN 7982, A4 stainless steel, plain
Film knife With specially coated blade
Metric double open-end wrench DIN 3110/ISO 1085
Cylinder saw, HSS bimetal Longlife & Speed HSCo8
Machinist's hammer German design in accordance with DIN 1041
Sweat band For automatic welding helmets
Half face mask HM 173
Metric double box-end wrench with POWERDRIV®
Metric combination wrench with POWERDRIV®