Cutting disc for steel
Cutting disc for steel
CUTDISC-BLUE-ST-SR-TH3,0-BR22,2-D230MM
Register now and access more than 2,000 products
- Synthetic resin-bonded, fibrous material-reinforced standard cutting disc
- For free-hand cutting with electric or pneumatic angle grinders
- High break resistance
- Max. circumferential speed 80 m/s
- Storage: Dry, at 20°C room temperature
- Work only with appropriate protective clothing.
- Always use an appropriate protective hood when performing cutting work.
- Only use undamaged discs.
- Do not jam/tilt the discs during cutting. Increased risk of breakage!
- Ensure correct contact pressure.
- Always clamp cutting discs (straight design) with the metal ring facing towards the machine.
Meets the maximum safety requirements in accordance with the EN 12413 European standard.
Datasheets(X)
General structural steels, high-strength structural steels, constructional steels, tool steels, hardened steels
Cutting solid materials, pipes, profiles and metal sheets
Versatility (points system) | 1 of 4 points |
Service life (points system) | 2 of 4 points |
Cutting ability (point system) | 1 of 4 points |
Handling/user-friendliness (point system) | 2 of 4 points |
Cut quality (point system) | 2 of 4 points |
Diameter | 230 mm |
Thickness | 3.0 mm |
Drill hole | 22.23 mm |
Design | Straight |
Max. rotation speed | 6600 rpm |
Max. circumferential speed | 80 m/s |
Last viewed
MFD-S multi-purpose drill bit with straight shank
Hook-&-Loop Foam Pad Flexible Rotary Polisher
Wire brush With wooden body
Pan head tapping screw, C shape with H recessed head DIN 7981, A4 stainless steel, shape C, with tip
1/2 inch socket wrench insert metric, hexagon, short
Pan head tapping screw, C shape with H recessed head DIN 7981, A4 stainless steel, shape C, with tip
Countersunk tapping screw shape C with H recessed head DIN 7982, A4 stainless steel, plain
Hook and loop support plate
Hand tap set HSS, DIN 352 3 pieces
Single-pole voltage tester