Engine seal

Name: Engine seal
Brand: Würth
SKU: 0893479005

Engine seal
ENGSEAL-5LTR

Art.-no. 0893479005

EAN 4046778982281

All versions

Prices for customers after login

Engine seal

Art.-no. 0893479005

Prices for customers after login

Quantity

x 1 pcs

Exclusively for trade customers

Login/Register
Call customer service: +94 112 894930

Silicone-containing engine and engine compartment sealing

User-friendly

No polishing required

Can also be applied to damp surfaces

Solvent-free

The vehicle can be started directly after application

Contains silicone

Freshens up plastic parts and engine components and leaves behind a water- and dirt-repellent protective film

The usage instructions are recommendations based on the tests we have conducted and on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We ensure the consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Würth Catalogue

Datasheets(X)

Certificates/ Documents

Instructions

Apply a thin layer after washing the engine using the sprayer and allow to dry for approx. 20-30 minutes. No polishing required

Contents	5 l
Smell/fragrance	Pleasant
Colour	Violet
Chemical basis	Aqueous silicone solution
pH value / conditions	7.5 / at 20°C
Density/conditions	1 g/cm³ / at 20°C
Min. flashing point	100 °C
Shelf life from production/conditions	24 Month / at 20°C

Suitable glove:

Product

Description

Nitrile chemical protective glove With cotton velour finish inside

Description:

Permeation level: 4

Nitrile chemical protective glove Long, heavy-duty design

Description:

Permeation level: 5

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time

Permeation level

< 10 min

≥ 10 min

≥ 30 min

≥ 60 min

≥ 120 min

≥ 240 min

≥ 480 min

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.