Welcome to Würth Sri Lanka For trade customers only

Pre-cleaner

Pre-cleaner
PRECLNR-ADH-1LTR

Art.-no. 08932001
EAN 4011231834261
Prices for customers after login
Pre-cleaner

Art.-no. 08932001

Prices for customers after login
Quantity
PU
x 12 pcs

Exclusively for trade customers

Register now and access more than 2,000 products

Specially tailored cleaner for plastics, painted metal surfaces and glass parts

Excellent cleaning power with high degree of material compatibility


  • Cleans contact surfaces thoroughly

  • Does not affect paints and plastics


Short flash-off time enables fast further processing of the cleaned parts

Notice

The cleaner is recommended in particular where physiologically unsafe solvents should not be used for safety reasons.

The usage instructions are recommendations based on the tests we have conducted and on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We ensure the consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Datasheets(X)

Certificates/ Documents

 | 

 | 

Application area

For thorough, fast cleaning and degreasing of plastic, glass and metal parts prior to painting, filling, gluing and sealing work, and for removing dent lifter adhesive residues.

Colour

Colourless

Density

0.717 g/cm³

Smell/fragrance

Mild

Shelf life from production

24 Month

Min. flashing point

-21 °C

Contents

1 l

Weight of content

717 g

Container

Can

Suitable glove:
 
Product
Description
Nitrile chemical protective glove With cotton velour finish inside
Nitrile chemical protective glove With cotton velour finish inside
Description:
Permeation level: 1
Nitrile chemical protective glove Long, heavy-duty design
Nitrile chemical protective glove Long, heavy-duty design
Description:
Permeation level: 1
Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.
Measured breakthrough time
Permeation level
< 10 min
0
≥ 10 min
1
≥ 30 min
2
≥ 60 min
3
≥ 120 min
4
≥ 240 min
5
≥ 480 min
6

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information