HHS 2000 PLUS adhesive lubricant
ADHLUB-HHS2000PLUS-400ML
Register now and access more than 2,000 products
No noise due to targeted application
- Eliminates creaking and squeaking noises.
- Outstanding creep and penetrating properties.
Extreme adhesion and pressure resistance
- No drips or soiling due to instant adhesion when spraying.
- High pressure resistance for reliable protection.
Wear resistance and material compatibility
- Boron nitride allows a wide temperature range for consistent lubrication.
- In the event of oil attenuation above 180 °C, boron nitride takes over lubrication up to 1,000 °C (dry lubrication).
- Free of microplastics.
This product is NSF H1 registered (164468). The registration confirms that the product meets the requirements of the NSF programme for lubricants that may come into contact with food, where such contact is technically unavoidable.
- NSF certification for use in the food industry.
- NSF registered in accordance with NSF H1: The product can come into contact with foodstuffs for technical reasons.
- If used in areas in which food is processed or stored, only the minimum quantity technically required may be used. If using the product as a corrosion-protection film, it must be removed completely before the device is put back into operation.
The usage instructions are recommendations based on the tests we have conducted and on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. If our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee the consistent quality of our products. We reserve the right to make technical changes and further develop products.
Datasheets(X)
For professional use in high pressure applications, under high ejection forces or in overhead applications such as on Bowden cables, bolts, joints, hinges, sliding rails, sprockets, toothed racks or open gears.
- Shake the can well before use.
- Thoroughly pre-clean the points to be lubricated.
- Then spray evenly onto the cleaned surface.
Chemical basis | Synthetic oil |
Oil basis | Synthetic |
Colour | Whitish |
Smell/fragrance | Characteristic |
Density | 0.855 g/ml |
Density conditions | at 20°C |
Min. temperature conditions | -40 °C |
Max. temperature conditions | 180 °C |
Max. temperature resistance | 1000 °C |
Min. flashing point of active ingredient | 200 °C |
Min. flashing point | 200 °C |
Kinematic oil basis viscosity | 612 cSt |
Silicone-free | Yes |
Acid-free | Yes |
Resin-free | Yes |
Resistance against | Salt water, Weak lyes, Weak acids, Splash |
Contents | 400 ml |
Weight of content | 377 g |
Shelf life from production | 24 Month |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!
Last viewed
Threaded rod DIN 976-1 (shape A) with standard metric ISO thread, zinc-plated steel 8.8, blue passivated (A2K)
O-ring, imperial NBR 70
Petrol fuel injection valve cleaner LBW 400
Side cutters DIN ISO 5749
Maintenance set 609
Spray hose
Parking light bulb T8.5 12V 4W BA9s
Metric double box-end wrench with POWERDRIV®
Precision dial gauge Accuracy grade: DIN 878
Workshop trolley Standard