Heat-shrink repair sleeve
Heat shrink repair sleeve
REPSLEV-HSHR-L750MM-108/27MM
Register now and access more than 2,000 products
- Inside coated with hot-melt adhesive
- Good physical, chemical and thermal properties
Meets the requirements of VDE 0298 Part 1 for cable sheath tests
Datasheets(X)
Fast, permanent and water-tight repair of damaged cable sheaths. The sealing rail can be removed after the sleeve has cooled down.
 | |
Type | 105/30 |
Diameter (D) | 108 mm |
Diameter (shrunk) | 27 mm |
Length | 750 mm |
Sleeve-wall thickness when shrunk | 4.7 mm |
Dielectric strength | 12 kV/mm |
Min./max. temperature conditions | -40 to 65 °C |
Min. shrinkage temperature | 90 °C |
Change in length (after shrinking, in %) | -10% |
Ultraviolet resistance | Yes |
Material | Polyolefin |
Halogen-free | Yes |
Colour | Black |
Last viewed
Adjustable open-end wrench
Electrical insulating tape
HSS bimetal cylinder saw
Sealing ring, aluminium, shape A
3/8 inch cardan joint
Twist drill bit HSS DIN 338 type RN 118°
Threaded rod DIN 976-1 (shape A) with standard metric ISO thread, A4 stainless steel
Half-round file DIN 7261, shape E
Windscreen lining tape For window installation
Metric combination wrench with POWERDRIV®