Welcome to Würth Sri Lanka For trade customers only

Valve grinding paste

Valve grinding paste
GRINDPAST-VALVE-120ML

Art.-no. 0890199

Prices for customers after login

Valve grinding paste

Art.-no. 0890199

Prices for customers after login

Quantity

PU

Exclusively for trade customers

Register now and access more than 2,000 products

Each half of the double can contains the settings for medium and fine pre- and post-sanding.
  • Pre- and post-grinding paste in the double can for grinding in valve cones, bearings and nozzles for combustion engines, compressors, machines etc.

  • Adding water brings the paste to the required consistency.

  • The remainder of the paste can be easily washed off after sanding.

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications as well as storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by the provision of this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee the consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Würth Catalogue(X)

Datasheets(X)

Contents

120 ml

Weight of content

180 g

Smell/fragrance

Faint odour

Colour

Grey

Density

1.5 g/cm³

AOX-free

Yes

Suitable glove:

 
Product
Description
Nitrile chemical protective glove
Nitrile chemical protective glove
Description:
Permeation level: 3
Cotton velour lining
Nitrile chemical protective glove, heavy-duty
Nitrile chemical protective glove, heavy-duty
Description:
Permeation level: 4
Long, heavy-duty design
Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.
Measured breakthrough time
Permeation level
< 10 min
0
≥ 10 min
1
≥ 30 min
2
≥ 60 min
3
≥ 120 min
4
≥ 240 min
5
≥ 480 min
6

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.
Art.-no. Cust. Mat. No.

Hazardous Material

Product information

Würth Catalogue

Catalogue page as PDF  | 

Datasheets()

Datasheets ()

CAD data  | 

Certificates/Documents

 | 

 | 

Technical information