Medium-strength screw retainer - THRLOK-DOS-MDSTRTH-25G

Medium-strength screw retainer - THRLOK-DOS-MDSTRTH-25G - 1

Medium-strength screw retainer - THRLOK-DOS-MDSTRTH-25G - 2

Medium-strength screw retainer - THRLOK-DOS-MDSTRTH-25G - 3

Medium-strength screw retainer - THRLOK-DOS-MDSTRTH-25G - 4

Medium-strength screw retainer

Name: Medium-strength screw retainer
Brand: Würth
SKU: 0893243025

Threadlocker medium strength
THRLOK-DOS-MDSTRTH-25G

Art.-no. 0893243025

EAN 4045989340965

All versions

Similar products

Prices for customers after login

Medium-strength screw retainer

Art.-no. 0893243025

Prices for customers after login

Quantity

x 1 pcs

Exclusively for trade customers

Login/Register
Call customer service: +94 112 894930

Removable screw retainer and sealing compound – one-handed dispensing system

Medium-strength bonding

Can be removed using normal tools

Can also be applied to stainless steel and passivated surfaces

No "accelerator" or "activator" required

Excellent media and thermal stability

Universal products with a wide range of application

Prevents detachment, e.g. through vibration and shock loads

No unwanted locking problems such as with mechanical screw retainers, for example

High resistance

Resistant to a large number of bases, gases, solvents, oils and fuels (see resistance list)

Silicone-free, solvent-free and oil-free

DOS system:

Practical one-handed operation thanks to the clever turn lock

One hand always remains free.

Continuously adjustable dispensing system

Dispensing can be adjusted to suit the application, and to keep consumption and costs to a minimum.

No residue material in dispensing neck

Costs optimised thanks to emptying with virtually no remaining product

Notice

The following plastics can be affected in the event of prolonged exposure: ABS, celluloid, polystyrene, polycarbonate (Macrolon), PMMA (Plexiglas), polysulfone, SAN (lurane, Tyril), Vinidur, vulcanised fibre, and painted surfaces.

Application area

The usage instructions are recommendations based on the tests we have conducted and on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. If our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee the consistent quality of our products. We reserve the right to make technical changes and further develop products. Please observe the technical data sheet!

Product information

Würth Catalogue

Datasheets(X)

Certificates/ Documents

Application area

For medium-strength retaining, fixing and sealing of threaded connections such as screws, stud bolts, nuts and threaded plugs, which are supposed to be detached again with normal tools. The medium-strength threadlocker is for use in the automotive and commercial vehicle industry, in metalworking and tool manufacturing, shipbuilding, mechanical engineering and engine construction, and electrical and electronics construction.

Instructions

This liquid plastic cures when in contact with metal in the absence of oxygen. The contact surfaces must be dry, dust-free and grease-free. Moisten the adhesive surfaces sufficiently and put them together immediately.

For more information, please refer to the technical data sheet.

Chemical basis	Dimethacrylic acid ester
Colour	Blue fluorescent
Density/conditions	1.12 g/cm³ / in accordance with DIN EN ISO 2811-1
Min./max. viscosity 1 /conditions 1	4000-9000 mPas / at 25°C, Brookfield RVT, spindle 3/2.5 rpm
Min./max. viscosity 2 /conditions 2	1500-3000 mPas / at 25°C, Brookfield RVT, spindle 3/20 rpm
Suitable for max. thread	M36
Max. gap-filling ability	0.25 mm
Min./max. initial strength	5-15 min
Min./max. functional strength	0.5-1 h
Min./max. final strength	1 h-3 h
Min./max. compressive shearing strength /conditions	10-20 N/mm² / in accordance with ISO 10123
Min./max. breakaway torque	15-25 Nm
Breakaway torque conditions	DIN EN 15865
Min./max prevail torque	3-8 Nm
Conditions for prevail torque	DIN EN 15865
Min./max. processing temperature	5 to 35 °C
Min./max. temperature resistance	-55 to 150 °C
Min. flashing point	100 °C
Shelf life from production/conditions	18 Month / at room temperature
Weight of content	25 g
Silicone-free	Yes
Solvent-free	Yes
Fully hardening/curing conditions	Exclusion of oxygen and contact with metal (copper or iron ions)

Suitable glove:

Product

Description

Nitrile chemical protective glove With cotton velour finish inside

Description:

Permeation level: 6

Nitrile chemical protective glove Long, heavy-duty design

Description:

Permeation level: 6

Disposable nitrile glove, extra strong

Description:

Permeation level: 1

Hard-wearing disposable gloves with excellent chemical protection

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time

Permeation level

< 10 min

≥ 10 min

≥ 30 min

≥ 60 min

≥ 120 min

≥ 240 min

≥ 480 min

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.