Mirror adhesive
Mirror adhesive
MRORADH-POLYMER-QUICKADHESIVE-290ML
Register now and access more than 2,000 products
Permanently elastic
Compensates for slight gap changes
Odourless and waterproof
Resistant to UV and ageing
Free from silicone and solvents
Consumption:
Approx. 1 cartridge per m2 with a bead thickness of 6–8 mm.
Cleaning:
- In liquid state with LU cleaner
- Can only be removed mechanically when hardened
The usage instructions are recommendations based on the tests we have conducted and based on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.
Datasheets(X)
For bonding silver mirrors according to EN 1036 DIN 1238 (for other mirrors, we recommend checking whether the adhesive attacks the mirror coating), mirrors to walls or doors and mirrored walls in shops. Adheres to surfaces such as load-bearing plaster and concrete, wood, gypsum plasterboard, particle boards and Styrofoam.
For bonding plastic mirrors (PMMA plastic mirrors)
- ICI Perspex: Bronze, silver, gold
- Rohm and Haas: Bronze, gold
- Plexiglas XT: Colourless
- Altulor plastic mirrors
- Mounting PMMA mirrors up to 600 x 600 mm in size with the mirror adhesive can be recommended.
Surface:
- Walls or ceilings must be clean, dry and free from dust and grease
- Remove loose coats of paint or debris
- The mirror must not be adhered to a wet or damp surface.
Joining:
Mount the mirror within 5 to 10 minutes after applying the adhesive and press on firmly.
Securing:
- Mirrors with a thickness of 2 mm and 4 mm can easily be fixed to vertical walls using just the mirror adhesive. Apply the mirror adhesive in vertical lines. Bead thickness between 6 mm and 8 mm. The distance between the lines should be 10 cm.
- Large, vertical mirrors (thickness of 6–8 mm) and mirrors on angled walls or ceilings must also be secured mechanically.
Fixing in place:
Fix large mirrors in place for approx. 12 hours.
Back ventilation:
The back of the mirror must be back-ventilated so that the adhesive can cross-link.
Chemical basis | Silane modified polymer |
Colour | Light grey (bright grey) |
Density/conditions | 1.4 g/cm³ / at 20°C, EN 542 |
Shore hardness A/conditions | 30 / in accordance with DIN 53505 |
Max. change in volume | 5 % |
Continuous motion absorption | 25 % |
Full curing speed | 3 mm/d |
Min. tensile strength | 0.8 N/mm² |
Max. open time | 15 min |
Min./max. processing temperature | 5 to 30 °C |
Min./max. temperature resistance | -35 to 90 °C |
Silicone-free | Yes |
Solvent-free | Yes |
Contents | 290 ml |
Weight of content | 406 g |
Shelf life from production/conditions | 12 Month / at 5°C to 30°C |
Last viewed
Coffee mug double wall black
Cleaning and washing device Tornador Gun
Engine flush and cleaner For use in all petrol and diesel engines
Lacquer coating system
Round pry bar C45
Protective glove Black Mechanic
Light nitrile glove For light to medium mechanical stresses
C 6.3 TX bit (1/4 inch)
Rivet nut with partial hexagon shank and dome head
Twist drill bit HSS DIN 338 type RN 118°