Multi-purpose grease IV
Multi-purpose grease, IV NSF
GRSE-(MULTIPURPOSE IV)-400G
Register now and access more than 2,000 products
- Suitable for food-contact areas
- EP additives for high pressure resistance
- Excellent dry-running properties
- Good sealing effect and corrosion protection
Greases are delivered in plastic cartridges! The plastic cartridges improve storage (they prevent the grease from oozing out at high temperature). Store cartridges upright in a cool, dry place! The operating instructions of the vehicle, machinery and assembly manufacturers must be observed.
NSF H1-registered (no.: 135924), meets the requirements of USDA 1998 H1. The product may come into contact with foodstuffs for technical reasons.
The usage instructions are recommendations based on the tests we have conducted and on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee the consistent quality of our products. We reserve the right to make technical changes and further develop products.
Datasheets(X)
Synthetic high-performance grease with white solid lubricants for the food industry.
Clean the lubricating point thoroughly before filling for the first time. Apply a thin and even coat to the parts to be lubricated. Observe the bearing manufacturer's specifications! Avoid mixing with other greases wherever possible. If used in areas in which food is processed or stored, only the minimum quantity technically necessary may be used.
Weight of content | 0.4 kg |
Container | Cartridge |
Soap base | AL complex |
Lubricant code | KPFHC2R-40 |
Min./max. temperature conditions | -45 to 180 °C |
Colour | White |
NLGI grade/conditions | 2 / with DIN 51818 |
Base oil viscosity, kinematic/conditions | 350 mm²/s / at 40°C |
Min. dripping point/conditions | 250 °C / in accordance with DIN ISO 2176 |
Min./max. worked penetration /conditions | 285 x 0.1 mm-285 x 0.1 mm / in accordance with DIN ISO 2137 |
Corrosion protection period/category | Corrosion category 0 |
VKA welding load | 3000 N |
Shelf life from production | 24 Month |
Oil basis | Synthetic |
Lubricant system | Grease |
Smell/fragrance | Characteristic |
Density | 0.981 g/cm³ |
Density conditions | at 20°C |
Conditions for viscosity of oil basis | at 40°C |
Dripping point conditions | in accordance with DIN ISO 2176 |
Min. temperature conditions | -45 °C |
Max. temperature conditions | 180 °C |
Max. short-term temperature resistance | 200 °C |
Worked penetration conditions | in accordance with DIN ISO 2137 |
Conditions for NLGI grade | with DIN 51818 |
Corrosion protection period conditions | in accordance with DIN 51802, SKF Emcor test |
Conditions for VKA welding load | in accordance with DIN 51350-4, VKA test (Institute for Internal Combustion Engines) |
Resin-free | Yes |
Silicone-free | Yes |
Acid-free | Yes |
AOX-free | Yes |
Free from heavy metals | Yes |
Chloric | No |
Resistance against | Water, Salt water, Acid, Lye |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!
Last viewed
Twist drill bit HSS DIN 338 type RN 130°
1/4-inch socket wrench For internal 5-star screws
Hammer drill bit, Longlife Quadro-L with SDS-plus drill chuck
Multi-purpose torch
Bimetal saw blade HSS
1/2 inch socket wrench insert metric, hexagon, short
Elbow pipe wrench S-jaw, Swedish form
Power mounting tape
Connection hose for 3-way catalytic converter cleaner
Universal holder E 6.3 (1/4") With quick-change chuck