Welcome to Würth Sri Lanka For trade customers only

Oil smoke stop

Oil smoke prevention oil
ADD-ENGCLNR-INTERI-OIL-SMOKE-STOP-300ML

Art.-no. 5861301300

EAN 4050642914353

Individual price display after login
Oil smoke stop

Art.-no. 5861301300

Individual price display after login
Quantity
PU

Exclusively for trade customers

Register now and access more than 2,000 products

Reduces smoking of petrol and diesel engines
  • Reduces oil consumption by stabilising the viscosity and compensates viscosity losses. Helps prevent blue exhaust smoke.

  • The can contents of 300 ml are sufficient for 5 litres of oil
Notice

Not suitable for use in motorcycles or quad bikes with wet clutches.

The usage instructions are recommendations based on the tests we have conducted and based on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Datasheets(X)

Certificates/ Documents

 | 

 | 

Application area

For use in all petrol and diesel engines. Compatible with all commercially available engine oils.

Instructions

After adding to the engine oil, let the engine run until it is warm. The product can be added at any time.

Contents

300 ml

Colour

Light brown

Smell/fragrance

Characteristic

Chemical basis

Combination of additives

Shelf life from production

60 Month

Density

0.893 g/cm³

Density conditions

at 20°C

Min. flashing point

101 °C

Suitable glove:
 
Product
Description
Nitrile chemical protective glove with cotton velour finish inside
Nitrile chemical protective glove with cotton velour finish inside
Description:
Permeation level: 6
Nitrile chemical protective glove long, heavy-duty design
Nitrile chemical protective glove long, heavy-duty design
Description:
Permeation level: 6
Disposable nitrile glove
Disposable nitrile glove
Description:
Permeation level: 3
Liquid-proof, food-safe disposable glove
Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.
Measured breakthrough time
Permeation level
< 10 min
0
≥ 10 min
1
≥ 30 min
2
≥ 60 min
3
≥ 120 min
4
≥ 240 min
5
≥ 480 min
6

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information