Paintwork finishing hammer
Body smoothing hammer
PANBETHAM-BDYWRK-D12MM-HANDLE200MM
Register now and access more than 2,000 products
With its specially shaped and polished striking surface, the hammer can be used to carefully straighten bulges or over-pulled dents
The striking surface is not chrome-plated to prevent chipping. Therefore, the hammer must always be lubricated after use. Tool marks can be rectified with a high-gloss polish.
Datasheets(X)
Face diameter (hammer) (Ø) | 12 mm |
Length of handle | 200 mm |
Last viewed
Hand-held rivet pliers
Protective glove Construct
Tapered pin with female thread, unhardened DIN 7978, plain steel, unhardened
Number punches
Crimp cable lug, round connector PVC-insulated
1/2 inch POWERDRIV® socket wrench insert metric, bi-hex, long
O-ring, imperial NBR 70
Threaded rod DIN 976-1 (shape A) with standard metric ISO thread, zinc-plated steel 8.8, blue passivated (A2K)
1/2 inch socket wrench insert, metric
Sandpaper strip Useit® Superpad vehicle