Plastic frame anchor W-UR 8, stainless steel A4 - ANC-(W-UR8)-PLA-AW30-A4-30/10-8X80

Plastic frame anchor W-UR 8, stainless steel A4

Name: Plastic frame anchor W-UR 8, stainless steel A4
Brand: Würth
SKU: 0912808503

Plstc frm achr, cnrsnk head, sst, A4 W-UR 8
ANC-(W-UR8)-PLA-AW30-A4-30/10-8X80
ZEBRA

Art.-no. 0912808503

EAN 4049557395142

All versions

Similar products

Prices for customers after login

Plastic frame anchor W-UR 8, stainless steel A4

Art.-no. 0912808503

Prices for customers after login

Quantity

x 50 pcs

Exclusively for trade customers

Login/Register
Call customer service: +94 112 894930

The first frame anchor with ETA approval. Tested and approved in more than 60 stone types and in aerated concrete. With countersunk head screw made of A4 stainless steel

Universal frame anchor (concrete, perforated and solid brick masonry, aerated concrete)

Push-through installation

Immediate load-bearing capacity — no waiting

Virtually no movement of the wall plug body

Low screw-in torque of the plug screw

"Slight" spreading of the anchor

2 insertion depths (h_nom = 50 + 70 mm)

High load-bearing capacities

Expansion in four directions

Improved load transfer in solid and hollow construction materials

Even, continuous load distribution across the entire expansion area

The hammer-in stop prevents premature expansion of the anchor during installation

Low assembly workload

Pre-assembled wall plug body and special screw

Saves an additional U washer and prevents contact corrosion

Anchorage via friction locking between wall plug body and anchoring base

Proof of Performance

W-UR 8, W-UR F 8 (galvanised steel, stainless steel): General construction permit Z-21.2-1838

W-UR 8 and W-UR F 8 (galvanised steel, stainless steel): European Technical Approval ETA-08/0190

Wall plug body made from high-quality polyamide

Fire resistance W-UR 8: Concrete: Tensile and transverse loads, R30, R60, R90, R120 (in accordance with Technical Report TR 020) Masonry tensile load: F30 (solid sand-lime brick, solid brick, hollow sand-lime brick) Transverse load: F30, F60, F90, F120 (vertically perforated brick, hollow sand-lime brick, solid brick, aerated concrete)

Notice

Useful information:

Drill perforated and hollow blocks with a rotary drill (without impact mechanism)

For anchoring in solid brick and solid sand-lime brick, we recommend that you perform pull-out tests due to the differences in brick manufacturing.

Drill cuttings must be removed from the drill hole

Lengths > 80 mm by special procurement

Application area

Metal substructures

Create the drill hole

Clean the drill hole

Set anchor and screw

Screw in the screw

Screw in screw until flush

Create the drill hole

Clean the drill hole

Set anchor and screw

Screw in the screw

Screw in screw until flush

W-UR 8, W-UR F 8 (galvanised steel, stainless steel): General construction permit Z-21.2-1838

W-UR 8 and W-UR F 8 (galvanised steel, stainless steel): European Technical Approval ETA-08/0190

Wall plug body made from high-quality polyamide

Product information

Würth Catalogue

Datasheets(X)

CAD data (available after login)

Certificates/ Documents

Application area

The anchor has European Technical Approval for use in multiple attachment of non-load-bearing systems (e.g. façades, suspended ceilings etc.)

W-UR, W-UR F can be anchored in the following anchoring bases: Standard concrete, masonry walls (solid brick, solid sand-lime brick, vertically perforated brick, hollow sand-lime brick, hollow lightweight concrete blocks, solid bricks and solid blocks made of lightweight concrete, concrete bricks, aerated concrete), brick ceilings, prestressed concrete hollow slabs, reinforced aerated concrete, gypsum wallboard

Installation temperatures:

Temperature of anchoring base: >= -40°C

Temperature of wall plug body: >= 0°C

The stainless steel screw can be used outdoors, in industrial atmospheres and in coastal areas

Suitable for attaching façade, ceiling and roof substructures (made of wood or steel), wooden beams, wooden laths, metal brackets, metal rails, suspended ceilings, cable conduits, angle brackets, profiles, wall-mounted cabinets, shelves etc.

Anchor diameter	8 mm
Anchor length (l)	80 mm
Nominal drill-bit diameter (d 0)	8 mm
Through-hole in the component to be connected (d f)	8.5 mm
Attachment height (t fix 1)	30 mm
Material of screw	Stainless steel A4
Internal drive	AW30
Approval	ETA-08/0190
Type description	W-UR 8 A4, countersunk head screw

Mounting characteristic values for concrete and masonry
Anchor diameter [mm]			W-UR 8
Nominal drill diameter		d₀[mm]	8
Drill cutting dia.		d_cut ≤ [mm]	8,45
Drill hole depth		h₁ ≥ [mm]	60⁷⁾	80
Setting depth of the wall plug body		h_nom [mm]	50⁷⁾	70
Through hole in attachment part		d_f ≤ [mm]	8,5
Concrete: ETA-08/0190, Multiple attachment of non-load-bearing systems
Anchor diameter [mm]			W-UR 8
Central tensile load¹⁾ for single anchors or dowel group	N_perm = C12/15 [kN]	30°C²⁾/50°C³⁾	1,2	1,6
		50°C²⁾/80°C³⁾	1,0	1,4
	N_perm ≥ C16/20 [kN]	30°C²⁾/50°C³⁾	1,6	2,4
		50°C²⁾/80°C³⁾	1,4	2,0
Shear load¹⁾ A4 stainless steel For single anchors or dowel group	V_perm ≥ C12/15 [kN]		3,37	3,37
¹⁾ The partial safety factors of the resistances regulated in the approval and a partial safety factor of the effects of γ_F = 1.4 have been taken into account. For the combination of tensile and transverse loads, please refer to ETAG 020 Appendix C. ²⁾ Maximum long-term temperature. ³⁾ Maximum short-term temperature. ⁷⁾ 2. setting depth applies to the following anchoring reasons: Concrete ≥ C12/15; Solid brick ≥ Mz 10 (≥ NF); Vertically perforated brick ≥ HLz 8 (≥ 2DF); Solid sand-lime brick ≥ KS 10 (≥ NF); Hollow sand-lime brick ≥ KS L 6 (≥ 2DF); Hollow sand-lime brick ≥ KS L 6 (≥ 12DF); Solid bricks made of standard concrete ≥ Vbn 10 (≥ NF); Solid bricks made of lightweight concrete ≥ V 2 (≥ NF).

Anchor dimensions
Anchor diameter	[mm]	W-UR 8
Total length	l [mm]	60	80	100	120	140	160
Max. mounting height, h_nom= 50 mm⁷⁾	t_fix[mm]	10⁷⁾	30⁷⁾	50⁷⁾	70⁷⁾	90⁷⁾	110⁷⁾
Max. mounting height, h_nom= 70 mm	t_fix[mm]	–	10	30	50	70	90
⁷⁾ 2. setting depth applies to the following anchoring reasons: Concrete ≥ C12/15; Solid brick ≥ Mz 10 (≥ NF); Vertically perforated brick ≥ HLz 8 (≥ 2DF); Solid sand-lime brick ≥ KS 10 (≥ NF); Hollow sand-lime brick ≥ KS L 6 (≥ 2DF); Hollow sand-lime brick ≥ KS L 6 (≥ 12DF); Solid bricks made of standard concrete ≥ Vbn 10 (≥ NF); Solid bricks made of lightweight concrete ≥ V 2 (≥ NF).

Masonry⁴⁾: ETA-08/0190, multiple mounting of non-load-bearing systems (temperature range 50°C²⁾/80°C³⁾)For other types of stone, raw densities, minimum pressure strengths or temperature ranges, please refer to the approval ETA-08/0190.
	Brick format [mm]	Raw density class [kg/dm³]	Minimum compressive strength [N/mm²]	F_perm. [kN]⁵⁾ (for single dowels or dowel group) W-UR 8 h_ef= 50 to 69 mm/ h_ef= 70 mm
Brick Mz, EN 771-1, DIN 105	≥ NF (≥ 240 x 115 x 71)	≥ 1.8	28	0,71	0,86
Brick Mz, EN 771-1, DIN 105	≥ NF (≥ 240 x 115 x 71)	≥ 1.8	36	1,0	1,14
Solid sand-lime brick KS, EN 771-2, DIN 106	≥ NF (≥ 240 x 115 x 71)	≥ 2.0	10	0,43	0,43
			20	0,57	0,71
			28	0,86	1,0
Plain concrete solid brick Vbn, EN771-3, DIN 18152	≥ NF (≥ 240 x 115 x 71)	≥ 2.0	10	0,43	0,43
			20	0,71	0,71
			28	1,0	1,0
Vertically perforated brick HLz⁶⁾, EN 771-1, DIN 105-1 e.g. Wienerberger, Schlagmann	≥ 2DF (≥ 240 x 115 x 113)	≥ 1.2	8	0,14	0,21
			12	0,21	0,26
			20	0,34	0,43
Vertically perforated brick POROTON S11-36.5⁶⁾, EN 771-1, Z-17.1-812 Wienerberger, Schlagmann	≥ 248 x 365 x 249	≥ 0.9	6	–	0,57
Vertically perforated brick UNIPOR WS14, UNIPOR WS12 CORISO EN 771-1, Z-17.1-883 Unipor-Ziegel Marketing GmbH	≥ 10DF (≥ 247 x 300 x 249)	≥ 0.8	10	–	0,17
	≥ 10DF (≥ 247 x 300 x 249)	≥ 0.8	12	–	0,21
Hollow sand-lime brick KSL⁶⁾, EN 771-2, DIN 106-1 e.g. Xella	≥ 2DF (≥ 240 x 115 x 113)	≥ 1.6	10	0,26	0,57
			12	0,26	0,71
			16	0,34	0,71
	≥ 8DF (≥ 249 x 240 x 238)	≥ 1.4	10	–	0,26
			12	–	0,34
			16	–	0,43
Hollow block made of lightweight concrete 3K Hbl, EN 771-3, DIN 18151⁶⁾ e.g. Liapor	≥ 16DF (≥ 498 x 240 x 238)	≥ 0.7	2	–	0,11
			4	–	0,26
			6	–	0,34
Hollow brick made of lightweight concrete Liapor-Super-K⁶⁾, EN 771-3, Z-17.1-501	≥ 16DF (≥ 495 x 240 x 238)	≥ 0.8	2	–	0,17
	≥ 16DF (≥ 495 x 240 x 238)	≥ 0.8	4	–	0,34
Aerated concrete AAC			2	–	0,14
Aerated concrete AAC			7	–	0,85
²⁾ Maximum long-term temperature. ³⁾ Maximum short-term temperature. ⁴⁾ For other types of stone, raw densities, minimum pressure strength or temperature ranges, please refer to the approval ETA-08/0190. ⁵⁾ The stone geometry should be compared with the approval ETA-08/0190. ⁶⁾ If the drill hole is made using an impact or hammer action, the permissible load must be determined by tests on the structure.