Pneumatic rod grinder DSG 22 Standard
Pneumatic rod grinder DSG 22 Standard
DIEGRIND-PN-(DSG 22 STANDARD)-1/4IN
MASTER
Register now and access more than 2,000 products
Rubberized handle
Protects tool from cold air and offers greater operator comfort.
Light and compact design
Provides exceptional maneuverability, versatility, and accessibility for difficult-to-reach spots.
Easy-to-use
Safety-lock throttle lever prevents accidental start-up.
Rear exhaust
Directs air away from the operator.
- When the die grinder is used regularly (e.g. for tyre maintenance), a little oil should be added daily, and approximately 2 strokes of gear grease should be added monthly via the grease nipple.
- Plug-in nipple not included in the scope of delivery
Datasheets(X)
Ideal for a variety of applications, including porting, weld cleaning, deburring, polishing and grinding
Max. idle speed | 22000 rpm |
Power output | 336 W |
Min. hose inner diameter | 9 mm |
Weight of machine | 600 g |
Air consumption | 370 l/min |
Operating pressure | 90 psi |
Connection thread | 1/4 inch |
Last viewed
Exhaust assembly paste
Slotted screwdriver with hexagon shank
Hammer drill bit Plus Duo-S Vario
Twist drill bit HSS DIN 338 TYPE RN
Cutting disc for steel
Spring cotter pin With single loop. Zinc-plated steel, blue passivated
Countersunk tapping screw shape C with H recessed head DIN 7982, steel, zinc-plated, blue passivated (A2K)
Hand tap set HSS, DIN 352 3 pieces
Cutting disc for steel
O-ring, metric