The images are examples. For detailed information, other images and documents, please select individual articles from the following table.
Combination polish P55 Plus
Prepare and seal paint in a single step
Register now and access more than 2,000 products
Variants
Register now and access more than 2,000 products
1-step polish (2-in-1)
- Developed specifically for use on old and new paint
- Excellent removal and intensive deep shine
- Ideally suited for refurbishing used vehicles
Innovative formula
- Scratches from car washes and paint defects are easily removed
- Forms lasting protection against environmental influences
Can be applied manually and by machine (with the exception of matt paints)
Free from volatile silicones
Recommended pad:
"Blue", "Lambskin" polishing pad, microfibre cloth
The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.
For conventional and scratchproof paint types.
Shake the bottle well before use. Pre-treat the vehicle with basic vehicle cleaner.
Manual:
Apply even coat of polish to the paint surface with a soft polishing cloth or polishing sponge, working in a circular motion, and then polish. Remove residual polish with a microfibre cloth.
Mechanical:
Moisten the surface of the selected polishing pad evenly with the paste and apply a small amount to the surface to be polished. Position the polishing pad flat on the area and start the machine. Polish the area applying a certain pressure until grinding traces or paint imperfections have been removed. Remove residual polish with a microfibre cloth.
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!