Welcome to Würth Sri Lanka For trade customers only

Sealant, removable

Sealant removable
BDYWRKSEAL-DABABLE-BLACK-310ML

Art.-no. 0890100043
EAN 4045989502103

Prices for customers after login
Sealant, removable

Art.-no. 0890100043

Prices for customers after login
Quantity
PU

Exclusively for trade customers

Register now and access more than 2,000 products

A versatile sealant that can be dabbed off, does not harden and cannot be painted over.

Forms a skin after a few minutes


Surface skin re-forms if the joint is damaged



Remains permanently sticky, does not harden and does not run off



High degree of material compatibility


Chrome, paint and rubber are not affected



Does not become brittle

Notice

Not suitable for expansion joints.

The usage instructions are recommendations based on the tests we have conducted and on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by the provision of this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee the consistent quality of our products. We reserve the right to make technical changes and further develop products. For further information, please refer to the technical data sheet.

Product information

Datasheets(X)

Certificates/ Documents

 | 

 | 

Application area

Can be used as a sealant in caravans, motorhomes, commercial vehicles, ships and equipment engineering. For sealing cracks, transitions, overlaps, bolted connections, roof systems, trim strips, windows, domed roof lights and under cover strips. Not suitable for expansion joints.

Instructions

The surfaces to be sealed must be clean, dry and free of grease. Spray sealant into joints, grooves, crevices, etc. and spread. Excess material can be dabbed off using the material itself or using bodywork sealing tape (after a brief flash-off time). For more information, please refer to the technical data sheet.

Chemical basis

Polyisobutylene

Colour

Black

Smell/fragrance

Characteristic

Min./max. temperature resistance

-30 to +100 °C

Resistance against

Water, Alkaline water, Aging

Min. flashing point

-25 °C

Recoatable/Can be painted over

No

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information