Welcome to Würth Sri Lanka For trade customers only

Sealant remover

Sealant remover
SEALREM-300ML

Art.-no. 08931000
EAN 4011231893756
Prices for customers after login
Sealant remover

Art.-no. 08931000

Prices for customers after login
Quantity
PU

Exclusively for trade customers

Register now and access more than 2,000 products

Removes sealing materials, adhesives, paints etc. in just minutes

Stable


No run-off on vertical surfaces

Notice
  • Protect painted surfaces

  • Check compatibility before use

  • Not suitable for delicate plastics, PVC and synthetic materials

The usage instructions are recommendations based on the tests we have conducted and on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We ensure the consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Datasheets(X)

Certificates/ Documents

 | 

 | 

Application area

Wide range of uses on metal, wood, glass, ceramic, polyethylene and polypropylene

Instructions
  • Shake can well

  • Spray surface and leave to take effect for 5-10 mins

  • Process surface with a suitable tool

Contents

300 ml

Smell/fragrance

Alcohol

Colour

Light yellow

Chemical basis

Mix of organic solvents

pH value

10.6-11.0

Density/conditions

0.79 g/cm³ / at 20°C

Shelf life from production

24 Month

AOX-free

Yes

Silicone-free

Yes

Suitable glove:
 
Product
Description
Nitrile chemical protective glove With cotton velour finish inside
Nitrile chemical protective glove With cotton velour finish inside
Description:
Permeation level: 3
Nitrile chemical protective glove Long, heavy-duty design
Nitrile chemical protective glove Long, heavy-duty design
Description:
Permeation level: 4
Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.
Measured breakthrough time
Permeation level
< 10 min
0
≥ 10 min
1
≥ 30 min
2
≥ 60 min
3
≥ 120 min
4
≥ 240 min
5
≥ 480 min
6

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information