Welcome to Würth Sri Lanka For trade customers only

Silicone fluid silicone spray

Silicone spray Silikon-Fluid NSF

Art.-no. 0893221000
EAN 4053479465791

Prices for customers after login
Silicone fluid silicone spray

Art.-no. 0893221000

Prices for customers after login

Exclusively for trade customers

Register now and access more than 2,000 products

High-quality, physiologically safe anti-friction and release agent

Contains highly concentrated, high-quality silicone oils

  • Optimum sliding and lubricating properties

  • Prevents sticking and wear

  • Eliminates unpleasant squeaking noises

Extremely high degree of temperature resistance from -50 °C to +250 °C

Wide range of applications, even in high temperatures and for use as a mould release agent

Colourless, non-discolouring

Good material compatibility

Moisture repellent

Protects e.g. rubber parts against frost



The product may come into contact with foodstuffs for technical reasons.

If used in areas in which food is processed or stored, only the minimum quantity technically required may be used. If the product is to be used as an anti-corrosive film, it must be completely removed before the device in question is used again.

NSF H1-registered (no.: 135927), meets the requirements of USDA 1998 H1.

The usage instructions are recommendations based on the tests we have conducted and on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We ensure the consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information


Safety data sheet

Certificates/ Documents



Application area

As an anti-friction agent and for the lubrication of all moving parts of machines, especially in the field of plastics, in automotive engineering and in the food, pharmaceutical, printing and paper industries. Also as a mould release agent in the plastics processing industry and for surface care and protection. Can be used in areas in which food is processed or stored.


Pre-clean the surface to be treated. Spray on evenly from a distance of approx. 20 cm.


0.4 l



Chemical basis

Physiologically harmless synthetic oil


0.785 g/cm³ / Active substance, 20°C

Min./max. temperature conditions

-50 to 250 °C

Shelf life from production

24 Month

Suitable glove:
Nitrile chemical protective glove With cotton velour finish inside
Nitrile chemical protective glove With cotton velour finish inside
Permeation level: 6
Nitrile chemical protective glove Long, heavy-duty design
Nitrile chemical protective glove Long, heavy-duty design
Permeation level: 6
Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.
Measured breakthrough time
Permeation level
< 10 min
≥ 10 min
≥ 30 min
≥ 60 min
≥ 120 min
≥ 240 min
≥ 480 min

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.

Cust. Mat. No.

Hazardous Material

Product information


Datasheets ()

CAD data  | 

Certificates/ Documents



Technical information