Welcome to Würth Sri Lanka For trade customers only

Drop-in anchor W-ED/A4

Drive-in dowel W-ED/A4, stainless steel A4
ANC-(W-ED/A4)-A4-M10

Art.-no. 090403010
EAN 4038898909736

Prices for customers after login
Drop-in anchor W-ED/A4

Art.-no. 090403010

Prices for customers after login
Quantity
PU
x 50 pcs

Exclusively for trade customers

Register now and access more than 2,000 products

Female thread anchor with metric thread for economical anchoring in concrete, A4 stainless steel

Female thread anchor with metric thread for economical anchoring in concrete, A4 stainless steel

  • Small drill hole depth

  • High working loads

  • Optical installation control and hand protection during assembly with the marking tool

  • The machine tool facilitates and speeds up installation

  • Immediate load-bearing capacity - no waiting

  • Fixture can easily be removed at any time

  • The attachment can be anchored with a fastening screw or a threaded rod

  • No installation torque required

  • The stop drill bit in combination with the clip-on expander tool facilitates and accelerates installation. The matching drill holes make the installation even more secure
Proof of Performance
  • ETA-02/0044 for individual fixing point, option 7, uncracked concrete

  • ETA-05/0120 for anchors in a redundant non-structural system in non-load-bearing systems, uncracked and cracked concrete, M6-M16

  • Fire resistance: F30, F60, F90 and F120; exposure to fire according to DIN 4102-2:1977-09 (uniform temperature curve)

  • Fire resistance: R30, R60, R90 and R120; TR020 (included in ETA-05/0120)
Notice

W-ED /S drive-in anchor, see [13.1]

Application area
Suspended ceilings

Drill hole

Clean the drill hole

Knock in anchor until flush

Anchor with expander tool

Fit component, apply torque

  • ETA-02/0044 for individual fixing point, option 7, uncracked concrete

  • ETA-05/0120 for anchors in a redundant non-structural system in non-load-bearing systems, uncracked and cracked concrete, M6-M16

  • Fire resistance: F30, F60, F90 and F120; exposure to fire according to DIN 4102-2:1977-09 (uniform temperature curve)

  • Fire resistance: R30, R60, R90 and R120; TR020 (included in ETA-05/0120)
Product information

Datasheets(X)

CAD data (available after login)

Certificates/ Documents

 | 

 | 

Application area
  • Individual fixing point: Normal weight concrete C20/25 to C50/60 (uncracked concrete)

  • Anchors in a redundant non-structural system: Anchorage of non-load-bearing systems (M6-M16, cracked and uncracked concrete)

  • Suitable for fastening threaded rods, metal structures, metal profiles, grilles, cable conduits, pipes, mounting rails etc.

  • For use in concrete < C20/25 and pressure-resistant natural stone (without approval)

  • W-ED/A4 (stainless steel A4) can be used in dry indoor areas, outdoors (including in industrial atmospheres and close to the sea) or in wet rooms, provided that no particularly aggressive conditions are present

  • W-ED/HCR (HCR high corrosion-resistant steel) can be used in areas where there is a very high risk of corrosion (e.g. indoor swimming pool atmosphere, road tunnels, poorly ventilated car parks, or parts that are immersed in seawater or in coastal atmospheres)

Anchor diameter

10 mm

Anchor length (L H)

40 mm

Min./max. required screw-in depth

11-15 mm

Material

Stainless steel A4

Nominal drill-bit diameter (d 0)

12 mm

Drill hole depth (h 0)

40 mm

Effective anchoring depth (h ef)

40 mm

Torque during anchoring (T inst)

15 Nm

Through-hole in the component to be connected (d f)

12 mm

Approval

ETA-02/0044
ETA-05/0120

Performance data
Anchor diameter [mm]M6M8M10M12M16M20
Admissible centric tension load1) on an individual anchor without the influence of the edge distanceTensile zone
(cracked concrete C20/252), s ≥ 3 hef, c ≥ 1.5 hef)
Nadm [kN] = C20/252)3,33,33,66,18,512,617,2
Admissible shear load1) on an individual anchor without the influence of the edge distanceCompressive zone
(uncracked concrete C20/252),
c ≥ 10 hef)
Vadm [kN] = C20/252)3,24,66,011,919,230,7
Anchors in a redundant non-structural system in non-load-bearing systems in concrete3)Fadm [kN] ≥ C20/251,21,72,02,02,4--
Admissible bending momentMadm (A4-70) [Nm]5,011,923,842,1106,7207,9
Madm (A4-80) [Nm]6,416,132,256,4142,9278,7
Admissible load when exposed to fire3)
(Technical Report TR 020)
For spacing and edge distances, see European Technical Approval ETA-05/0121
R30; Fadm [kN]0,80,91,51,5--
R60; Fadm [kN]0,80,91,51,5--
R90; Fadm [kN]0,40,91,51,5--
R120; Fadm [kN]0,20,41,01,2--
Fire resistance rating4)F30 [kN]1,71,73,04,76,912,518,0
F60 [kN]0,70,71,52,43,55,68,5
F90 [kN]0,40,40,81,31,83,55,5
F120 [kN]0,30,30,61,01,42,54,4
Installation parameters in concrete
Anchor size [mm] M5x251)M6x25M6x30M8x25M8x30M8x40M10x25
Standard component thicknesshmin,2 [mm]100100100100100100100
Characteristic spacing of uncracked concrete/anchors in a redundant non-structural systemscr,N/scr75/--/7590/130-/7590/80120/210-/75
Characteristic edge distance of
uncracked concrete/anchors in a redundant non-structural system
ccr,N/ccr3)/--/3)3)/3)-/3)3)/3)3)/105-/3)
Minimum spacingsmin [mm]60305550608060
Minimum edge distancecmin [mm]9560951009595100
Minimum member thicknesshmin,1 [mm]-80-80--80
Minimum spacingsmin [mm]-30-70--70
Minimum edge distancecmin [mm]-60-100--100
Effective anchorage depthhef [mm]25253025304025
Nominal drill diameterd0 [mm]88810101012
Diameter of cutting edgesdcut ≤ [mm]8,458,458,4510,4510,4510,4512,5
Drill hole depthh0 = [mm]25253025304025
Through hole in the component being connecteddf ≤ [mm]67799912
Thread depth
(max. length of thread engagement)
Lth [mm]10121312132012
Minimum length of thread engagementLsdmin ≤ [mm]66789910
Torque while installing anchorTinst ≤ [Nm]34488815
Installation parameters in concrete
Anchor size [mm]M10x30M10x40M12x25M12x50M16x65M20x80
Standard component thicknesshmin,2 [mm]120120100130160200
Characteristic spacing of uncracked concrete/anchors in a redundant non-structural systemscr,N/scr3)/230120/170-/-150/170195/400240/-
Characteristic edge distance of uncracked concrete/anchors in a redundant non-structural systemccr,N/ccr3)/1153)/3)-/3)3)/3)3)/2003)/-
Minimum spacingsmin [mm]100100100120150160
Minimum edge distancecmin [mm]115135110165200260
Minimum member thicknesshmin,1 [mm]--80---
Minimum spacingsmin [mm]--100---
Minimum edge distancecmin [mm]--130---
Effective anchorage depthhef [mm]304025506580
Nominal drill diameterd0 [mm]121215152025
Diameter of cutting edgesdcut ≤ [mm]12,512,515,515,520,5525,55
Drill hole depthh0 = [mm]304025506580
Through hole in the component being connecteddf ≤ [mm]121214141822
Thread depth
(max. length of thread engagement)
Lth [mm]121512182334
Minimum length of thread engagementLsdmin ≤ [mm]101112131822
Torque while installing anchorTinst ≤ [Nm]1515353560120
Installation parameters
M6M8x30M8x40M10M12M16M20
Minimum spacingsmin [mm]506080100120150160
Minimum edge distancecmin [mm]809595135165200260
Minimum member thicknesshmin [mm]100100100130140160250
Effective anchorage depthhef [mm]30304040506580
Nominal drill diameterd0 [mm]81012152025
Diameter of cutting edgesdcut ≤ [mm]8,4510,4512,4515,520,5525,55
Drill hole depthh0 = [mm]30304040506580
Through hole in the component being connecteddf ≤ [mm]7912141822
Thread depth (max. length of thread engagement)Lth [mm]13132015182334
Minimum length of thread engagementLsdmin [mm]7911131822
Torque while installing anchorTinst = [Nm]48153560120

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information