Silicone remover
Silicon remover bulk can
SILREM-1LTR
Register now and access more than 2,000 products
- High level of cleaning power and long flash-off time
- Ideally suited for cleaning plastic
Flammable liquids, Category 3; specific target organ toxicity - one-off exposure, Category 3, central nervous system; specific target organ toxicity - repeated exposure, Category 1, central nervous system; aspiration hazard, Category 1; chronic aquatic toxicity, Category 2
The usage instructions are recommendations based on the tests we have conducted and on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We ensure the consistent quality of our products. We reserve the right to make technical changes and further develop products.
Datasheets(X)
Suitable as a cleaner or degreaser for all surfaces with silicone present. Also suitable for professional pre-treatment when applying adhesives or painting (especially for touching up and parts painting). Also highly suitable for cleaning plastics.
Apply silicone remover to a clean cloth and thoroughly rub the surface to be treated. Then rub and dry with a clean cloth.
Contents | 1 l |
Container | Can |
Smell/fragrance | Mild |
Colour | Colourless |
Chemical basis | Naphtha |
Density | 0.766 g/cm³ |
Min. flashing point | 40 °C |
Shelf life from production | 24 Month |
Bio-degradable | Yes |
AOX-free | Yes |
Last viewed
Standard cable tie with plastic latch
2-CUTTER SDS-PLUS HAMMER DRILL BITS Red Stripe
Screwdriver slotted short with round shank
Thread die HSS DIN EN 22568 for standard metric ISO threads
Cavity protection gun SATA HRS
Twist drill bit HSS DIN 338 type RN 130°
Drop-in anchor W-ED/S
1/2 inch socket wrench insert metric, hexagon, short
Metric double box-end wrench Hexagon with POWERDRIV®
Maintenance set 7 pieces