Welcome to Würth Sri Lanka For trade customers only

Engine sealing compound Silicone Special 250

Engine sealing compound, Silicone Special 250
ENGSEALCOMPD-SIL-SPECIAL250-RED-70ML

Art.-no. 0890321
EAN 4011231822930

Prices for customers after login
Engine sealing compound Silicone Special 250

Art.-no. 0890321

Prices for customers after login
Quantity
PU

Exclusively for trade customers

Register now and access more than 2,000 products

Permanently elastic silicone sealing compounds for engine and bodywork, brief temperature resistance of 300°C
  • Cold-vulcanising silicone rubber

  • Bridges larger unevenness

  • Reliable at sealing, even after withstanding years of vibrations

  • Excellent adhesion and chemical resistance

  • Does not run or pull threads

  • Skin formation after just a few minutes, vulcanisation rate approx. 1.5 mm/day

The usage instructions are recommendations based on the tests we have conducted and based on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Datasheets(X)

Safety data sheet

Certificates/ Documents

 | 

 | 

Application area

For sealing surfaces, gaps and cracks in separating joints, cylinder heads, crank housings, water pumps, coolers, axle tubes, cylinder bases (motorbike), lamp and turn signal housings, welding seams etc.

Contents

70 ml

Chemical basis

Acetate-curing sealant

Density/conditions

1.05 g/cm³ / at 20°C

Full curing speed

1.5 mm/d

Colour

Red

Smell/fragrance

Vinegar

Weight of content

73 g

Min. skin-formation time

6 min

Max. skin-formation time

12 min

Conditions for skin-formation time

at 23°C and 50% relative humidity

Shore A hardness

30

Elongation at break

300 %

Continuous motion absorption (up to 150°C)

25 %

Continuous motion absorption (above 150°C)

18 %

Min./max. temperature resistance

-50 to 250 °C

Max. short-term temperature resistance

300 °C

Min./max. processing temperature

5 to 40 °C

Shelf life from production

18 Month

Conditions to maintain shelf life from production

cool and dry storage area below 25°C

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information