Welcome to Würth Sri Lanka For trade customers only

Perfect zinc spray

Metal surface, zinc spray perfect
ZNSPR-PERFECT-400ML

Art.-no. 0893114113
EAN 4046777216271

Prices for customers after login
Perfect zinc spray

Art.-no. 0893114113

Prices for customers after login
Quantity
PU

Exclusively for trade customers

Register now and access more than 2,000 products

Outstanding long-term protection and optimum metal surface appearance

High layer thickness in first spray pass


  • High degree of safety thanks to optimum weathering protection

  • Minimum amount of time spent, as only one operation is required

  • Good coverage


Versatile use with adjustable spray head


Large area and minor repairs can be carried out quickly and reliably with the variable spray head.



High degree of resistance to running



High degree of wear resistance



Tested corrosion protection in accordance with DIN


  • Perfect zinc spray, light: 250 hours

  • Perfect zinc spray: 500 hours

  • Can be used for repairs in accordance with DIN EN ISO 1461


Spot weldable

Notice

Perfect zinc spray and Perfect light zinc spray contain zinc, and therefore offer optimum, active cathodic protection against corrosion. If the surface is damaged, the zinc coating sacrifices itself (sacrificial anode), thereby protecting the metal against rust. The remaining products protect the entire surface against rust. If the surface is damaged, the metal is no longer protected.


Not suitable as adhesive base for PU, MS polymer or hybrid sealing compounds.

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Datasheets(X)

Safety data sheet

Certificates/ Documents

 | 

 | 

Application area

For visual enhancement, repair and protection against corrosion of metallic surfaces.

Instructions

The application surface must be clean, dry and free from grease. Remove rust and old loose paint, then sand and clean. Shake can vigorously for at least 2 minutes before use.

Contents

400 ml

Chemical basis

Acrylic resin

Colour

Zinc

Gloss level

Matt

Min. curing time

1 h

Fully hardening/curing conditions

At recommended dry layer thickness

Resistance in salt-spray test

500 h

Max. temperature resistance

400 °C

Dust-drying time

5 min

Dry layer thickness (first back-and-forth motion)

40 µm

Conditions for dust-drying time

at recommended dry layer thickness

Purity rating zinc

99 %

Zinc content in the dry film

91.5 %

Zinc content in the paint

65 %

Coating thickness

40 µm

Recoatable/Can be painted over

Conditional, preliminary testing required

Grip strength conditions

at recommended dry layer thickness

Substrates with good adhesion

Steel
Zinc plated steel

Spot weldable

Yes

AOX-free

Yes

Cross-cut test

MAN 0-1

Min./max. grip strength

15-20 min

Cross-cut test conditions

in accordance with DIN 53151

Conditions for resistance in salt-spray test

in accordance with DIN 50021

Shelf life from production

36 Month

Conditions to maintain shelf life from production

at 10°C to 25°C

Min. flashing point

21 °C

Suitable glove:
 
Product
Description
Nitrile chemical protective glove With cotton velour finish inside
Nitrile chemical protective glove With cotton velour finish inside
Description:
Permeation level: 1
Nitrile chemical protective glove Long, heavy-duty design
Nitrile chemical protective glove Long, heavy-duty design
Description:
Permeation level: 2
Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.
Measured breakthrough time
Permeation level
< 10 min
0
≥ 10 min
1
≥ 30 min
2
≥ 60 min
3
≥ 120 min
4
≥ 240 min
5
≥ 480 min
6

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information