Special circular saw blade for non-ferrous metals
Special circular saw blade
CRCLSAWBLDE-MET-D250X80TOTHXBO30MM
Art.-no. 0611025802
EAN 4011231501132
Register now and access more than 2,000 products
Tooth shape
- Trapezoidal tooth/flat tooth (TT/FT)
Machine
- For bench and panel circular saws and chop and mitre saws
Materials
- Profile and solid materials made of aluminium and other non-ferrous alloys, acrylic resin and Pertinax
Version
- Positive rake angle for easier feed
- Negative rake angle, especially suitable for thin-walled aluminium profiles
- Due to the negative tooth shape, the workpiece is not drawn into the saw blade, but instead provides slight resistance and can therefore be better guided by hand
Datasheets(X)
 | |
Diameter x saw cutting width/main blade thickness x drill hole | 250 x 3.2 / 2.5 x 30 mm |
Number of teeth | 80 PCS |
Tooth shape | Trapezium tooth/flat tooth |
Tooth geometry | Positive |
Material to be processed | Aluminium, Non-ferrous metal, Acrylic resin, Pertinax |
Side holes | Combi (2/10/60 - 2/11/63 - 2/12/64) |
Max. rotation speed | 7600 rpm |
Suitable for machine type | Bench and panel sizing circular saws |
Last viewed
PTFE thread-sealing tape
Key fob Hexagon
Pipe clamp, two-part, with rubber
Chuck For hand-lever grease guns
1/4 inch socket wrench insert, metric short
Pneumatic hose reel DSA 15
Light nitrile glove for light to medium mechanical stresses
Neutral silicone
Conical countersink blue ring HSS, DIN 335C, 90°
T-handle screwdriver with bit strip, 10 pcs and PH2 bit