Stain remover
Stain remover
SAIREM-1LTR
Register now and access more than 2,000 products
- Solvent-based
- Does not leave any dirty edges
- Neutral behaviour towards metal
Combustible liquids, Category 2: skin irritation, Category 2; specific target organ toxicity - one-off exposure, Category 3: inhalation risk, Category 1: chronic aquatic toxicity, Category 2
Ventilate well during and after application. Store close to the ground in a cool, dry place.
The usage instructions are recommendations based on the tests we have conducted and on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We ensure the consistent quality of our products. We reserve the right to make technical changes and further develop products.
Datasheets(X)
Easily removes tar, oil, grease and lubricant stains from upholstery, roof liners, carpet, textiles etc.
Add stain remover to a clean, dry and lint-free cloth and rub out the stain, working from the outside to the centre.
Contents | 1 l |
Container | Can |
Smell/fragrance | Characteristic |
Colour | Colourless |
Chemical basis | Naphtha |
Density/conditions | 0.698 g/cm³ / at 15°C |
Min. flashing point | -15 °C |
Density | 0.698 g/cm³ |
Shelf life from production | 24 Month |
Last viewed
Rim brush
Mirror adhesive
Countersunk tapping screw shape C with H recessed head DIN 7982, steel, zinc-plated, blue passivated (A2K)
Twist drill bit HSS DIN 338 type RN 130°
Parking light bulb T8.5 12V 4W BA9s
Universal electrician's tool case 38 pieces
Diamond cutting disc CONSTRUCTION SITE
Hex head screw with thread up to head DIN 933, steel 8.8U, hot-dip galvanised (hdg)
Self-adhesive fusible layer
Application gun WIT (WIT-PE 500)