Standard car windscreen wiper with pre-assembled multi-adapter
Car windscreen wiper Standard
WSCRNWPR-CAR-350MM-14IN-1PCE
Register now and access more than 2,000 products
Resealable individual packaging
- Lengths can be individually customised
- Low storage costs and minimal space requirement
Robust metal bar system
- Individual joints connected via stainless steel rivets
- High resistance to weathering
- Stainless steel pin joints in plastic casing
- Quiet wiper blade behaviour on the windscreen
Refillable (replacement rubber wiper blade)
- Optimised storage costs
- Protecting resources (environment)
Scope of delivery:
1x windscreen wiper with profile edge protection including preinstalled multi-adapter and 9 x 3 U-clip adapters for high market coverage
Safety:
Make sure that the windscreen is free of oil, wax, tar and other soiling, so that the service life is not negatively affected.
Tip:
Always lay a protective material on the windscreen when mounting.
Installation:
For aerodynamic reasons (spoiler function), it must be ensured during mounting that the punched logo on the wiper blade faces the engine hood.
For older cars with hook mountings (9 x 4 and 9 x 3 mm) and new vehicles with hook wiper arms (normally small cars, Asian vehicle manufacturers).
Length | 350 mm |
Length in inches | 14 in |
Datasheets(X)
Last viewed
Decorative trim adhesive tape
VDE screwdriver, flat slotted
Screwdriver slotted striking cap with hexagon shank
T-handle socket wrench for hexagon head screws
Anti-hologram polish P30 Plus
Active Clean vehicle cleaner
Hand tap, taper tap HSS DIN 352
Screw with flattened half round head and hexagon socket ISO 7380-1 steel 010.9, zinc-plated blue passivated (A2K)
Polishing pad
Vehicle basic cleaner