HSS spot weld drill bit
HSS spot weld drill bit
DRL-SPTWELD-HSS-D8MM
Register now and access more than 2,000 products
Special drill bit for removing spot welds
Fixed centring point means that no centre punching is required
Improved PLUS centring point also suitable for use on high-strength sheet metal
The optimised tip geometry ensures a longer service life than for conventional spot weld drill bits.
Suitable for use in any standard drill
Recommended rotation speed:
- for dia. 6: up to 920 rpm
- for dia. 8: up to 700 rpm
Tips for increasing the service life of the centring point:
- Do not use in drills with an impact chuck or spindles.
- Set the drill to a suitable rotation speed; the rotation speed of compressed-air devices is generally set too high.
Datasheets(X)
Diameter | 8 mm |
Length | 78 mm |
Chip flute length | 38 mm |
Last viewed
1/2 inch torque wrench With push-through square drive and fine-toothed ratchet head
Multi-purpose grease I
PH 3-component screwdriver
Hammer drill bit Max Quadro-L
Metric double box-end wrench with POWERDRIV®
Twist drill bit HSS DIN 338 type RN 130°
Lamella flap disc Mini-Disc alumina zirconia
Car Windscreen Wiper Hybrid Blade Classic
Cylinder saw, HSS bimetal Longlife & Speed HSCo8
Air conditioning disinfectant spray