Welcome to Würth Sri Lanka For trade customers only

FI-Cleaner vehicle cleaner

Vehicle cleaner FI-Cleaner
CLNR-VEH-IN-FI-1000ML

Art.-no. 0890120
EAN 4058794032420

Prices for customers after login
FI-Cleaner vehicle cleaner

Art.-no. 0890120

Prices for customers after login
Quantity
PU

Exclusively for trade customers

Register now and access more than 2,000 products

  • Cleans powerfully yet gently

The usage instructions are recommendations based on the tests we have conducted and based on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Datasheets(X)

Safety data sheet

Certificates/ Documents

 | 

 | 

Application area

Seat covers, neck supports, carpets, vehicle ceiling, door claddings, soiling in the luggage compartment etc.

Instructions

Simply spray vehicle interior cleaner, let it take effect briefly and then remove the loosened dirt with a brush, cloth or sponge.


Vehicle interior cleaner can be diluted up to a mixing ratio of 1:10.

Contents

1 l

Container

Spray bottle

Smell/fragrance

Characteristic

Colour

Yellow

Chemical basis

Nonionic tenside

pH value

11.2

Density/conditions

1.04 g/cm³ / at 20°C

Shelf life from production

24 Month

Bio-degradable

Yes

AOX-free

No

Silicone-free

Yes

Suitable glove:
 
Product
Description
Nitrile chemical protective glove With cotton velour finish inside
Nitrile chemical protective glove With cotton velour finish inside
Description:
Permeation level: 6
Nitrile chemical protective glove Long, heavy-duty design
Nitrile chemical protective glove Long, heavy-duty design
Description:
Permeation level: 6
Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.
Measured breakthrough time
Permeation level
< 10 min
0
≥ 10 min
1
≥ 30 min
2
≥ 60 min
3
≥ 120 min
4
≥ 240 min
5
≥ 480 min
6

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information