Welcome to Würth Sri Lanka For trade customers only

Diesel air intake cleaner

System cleaner diesel
SYSCLNR-DISL-400ML

Art.-no. 5861013300
EAN 4050642910119

Prices for customers after login
Diesel air intake cleaner

Art.-no. 5861013300

Prices for customers after login
Quantity
PU

Exclusively for trade customers

Register now and access more than 2,000 products

For removing contamination and deposits in the intake area without needing to remove components

Cleaning effect


Cleaning the intake area of diesel engines.



Improves engine performance


Rectifies faults caused by deposits in the intake area.



Cleans the intake system of light to medium deposits


No disassembly is required for cleaning.

Notice

Only clean when at operating temperature.

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications as well as storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by the provision of this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee the consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Datasheets(X)

Certificates/ Documents

 | 

 | 

Application area

Ideally, perform a test drive in advance. Alternatively, let the engine run until warm for at least 20 minutes. During the application, let the engine run at changing speeds up to a maximum of 2000 rpm. Use short spraying intervals of no more than 3 seconds. Leave a 10-second pause between each spraying action. Prevent fluid from collecting!

Contents

400 ml

Colour

Clear

Chemical basis

Water

Shelf life from production

18 Month

Density

1.039 g/cm³

Density conditions

at 20°C

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information