Thread die HSS DIN EN 22568 for standard metric ISO threads
Threaded die HSS DIN 13-1
THRDIE-HSS-DIN223-M12
Register now and access more than 2,000 products
Two-sided cut
- Can be used on both sides
- Threads can be cut in one process
- Easy cutting and excellent chip removal in cutting direction
High edge retention
Datasheets(X)
The die is placed in the die holder at the height of the middle screw. The screws are tightened with a screwdriver. The die is placed vertically on the workpiece. Can be used on both sides. When cutting, sufficient cutting oil must be added. After two revolutions, the cut can be broken by briefly turning back.
Type description | For metric ISO thread DIN 13 |
Cutting material | HSS |
Surface | Plain |
Thread type | Metric thread |
Form | B |
Tolerance class | 6g |
Thread type x nominal diameter | M12 |
Pitch | 1.75 mm |
Outer diameter | 38 mm |
Height | 14 mm |
Material to be processed | Steel |
Last viewed
Diesel performance improver
Radiator Coolent Water Based
Weather sealant Neutral silicone
Twist drill bit HSS DIN 338 type RN 118°
Rapid windscreen cleaner in display carton
Rodent Protection Spray
Rim brush
TX bit with hole
1-inch impact socket wrench insert hexagon, metric, short
Safety glasses Standard