Thread die HSS DIN EN 22568 for standard metric ISO threads
Threaded die HSS DIN 13-1
THRDIE-HSS-DIN223-M7
Register now and access more than 2,000 products
Two-sided cut
- Can be used on both sides
- Threads can be cut in one process
- Easy cutting and excellent chip removal in cutting direction
High edge retention
Datasheets(X)
The die is placed in the die holder at the height of the middle screw. The screws are tightened with a screwdriver. The die is placed vertically on the workpiece. Can be used on both sides. When cutting, sufficient cutting oil must be added. After two revolutions, the cut can be broken by briefly turning back.
Type description | For metric ISO thread DIN 13 |
Cutting material | HSS |
Surface | Plain |
Thread type | Metric thread |
Form | B |
Tolerance class | 6g |
Thread type x nominal diameter | M7 |
Pitch | 1 mm |
Outer diameter | 25 mm |
Height | 9 mm |
Material to be processed | Steel |
Last viewed
External lens For WSH II 3/11, WSH II 9-13, WSH II 5-13, WSH III 10-11, WSH III 9-13 and WSH III 5-13 automatic welding helmets
Handle For spray extraction device
Pan head tapping screw, C shape with H recessed head DIN 7981, A4 stainless steel, shape C, with tip
1/2 inch impact socket wrench insert, power With integrated reinforcement ring for longer service life
Polishing pads
Multi-purpose carbide drill bit
Simplex soft face hammer With steel housing
Ratchet combination wrench set, metric, straight 5 pieces in plastic case
PH screwdriver with hexagon shank
3/8 inch socket wrench insert metric, hexagon, short