Underseal - UBS-PERMANENT-SPRAYABLE-BLACK-1000ML

Underseal

Name: Underseal
Brand: Würth
SKU: 0892072

Underseal
UBS-PERMANENT-SPRAYABLE-BLACK-1000ML

Art.-no. 0892072

EAN 4046777216066

All versions

Similar products

Prices for customers after login

Underseal

Art.-no. 0892072

Prices for customers after login

Quantity

Exclusively for trade customers

Login/Register
Call customer service: +94 112 894930

Bitumen-based coating compound containing solvents, cannot be painted over

With long-term protection and anti-humming effect

Resistant to splash water and salt water, weak acids and bases

Notice

After use, turn the aerosol can upside down and spray until the valve is empty. Do not spray on joints, engines, gears and brake systems. Working pressure 3-6 bar when applying with underbody protection gun, art. no.: 0891110640.

The usage instructions are recommendations based on the tests we have conducted and are based on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Würth Catalogue

Datasheets(X)

Safety data sheet

Certificates/ Documents

Application area

For repairing and protecting concealed areas that do not need to be painted over. Particularly suited for use as an anti-humming compound in external applications involving e.g. wheel wells, undercarriage etc.

Instructions

Shake the can well before use. The surface must be dry and free from rust, dirt and grease. Optimal spraying distance is 30 cm. Allow the product to dry between coatings in case of thicker coatings. Working pressure: 3-6 bar.

Chemical basis	Bitumen
Surface pre-treatment required	Dry, dust and grease-free
Contents	1000 ml
Weight of content	1098 g
Smell/fragrance	Characteristic
Colour	Black
Min. proportion of solids	66 %
Min./max. temperature resistance	-25 to 80 °C
Conditions for through drying	At 20°C, 400 μ wet
Min. spraying distance	20 cm
Conditions for skin-formation time	at 20°C
Min. skin-formation time	75 min
Drying time	2.5 h
Conditions for drying time	at 20°C
Density	1.09 kg/m³
Ignition temperature	200 °C
Density conditions	at 20°C
Shelf life from production	24 Month
Max. temperature resistance	80 °C
Min. temperature conditions	-25 °C
Min. temperature resistance	-25 °C
Max. spraying distance	30 cm
Recoatable/Can be painted over	No

Required accessory:

Product

Description

Quantity

Price
/PU

Undercoating spray gun For applying gravel guard and undercoating products containing solvents

UBSSPRGUN-R1/4IN-BOTTLE-1LTR

Art.-no. 08911063

For applying stone chip and underseal products containing solvents.

x 1 pcs

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).

Suitable glove:

Product

Description

Nitrile chemical protective glove With cotton velour finish inside

Description:

Permeation level: 3

Nitrile chemical protective glove Long, heavy-duty design

Description:

Permeation level: 4

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time

Permeation level

< 10 min

≥ 10 min

≥ 30 min

≥ 60 min

≥ 120 min

≥ 240 min

≥ 480 min

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.