Universal three-arm external and internal extractor
Universal extractor three-arm
EXTR-UNI-3ARM-SPNW90MM
Register now and access more than 2,000 products
- Proven model for secure and rapid removal of races, gears, ball bearings etc.
- Even load distribution over 3 pulling hooks for a secure hold and centred removal
- Cross-beam in cast iron due to geometry
- Drop-forged hooks
- Gas nitrocarburised spindle
- Precision-milled feet grip parts being removed securely and gently
Datasheets(X)
 | |
External clamping width (A) | 90 mm |
Clamping depth (B) | 100 mm |
Min./max. internal clamping width (C) | 90-140 mm |
Spindle length | 140 mm |
Hook width (D) | 22 mm |
Hook-tip length (E) | 12 mm |
Hook-tip thickness (F) | 3 mm |
Max. extraction weight (t max) | 3 t |
Number of arms | 3 PCS |
Thread dimension | M14 x 1.5 |
Last viewed
HSS 90° yellow-ring countersink DIN 335C
2-CUTTER SDS-PLUS HAMMER DRILL BITS Red Stripe
Adapter A4 With centre drill bit
VDE side cutters, DIN ISO 5749 IEC 60900
Angle Grinder EAG 7-115
Transparent single-pole voltage tester
O-ring, metric
Adhesive remover spray
Flat washer without chamfer DIN EN ISO 7089, steel, hot-dip galvanised (hdg)
Tapered pin with female thread, unhardened DIN 7978, plain steel, unhardened