Circlip pliers, shape C For bore circlips
DIN 5256 shape C drill hole circlip
CRCLIPPLRS-C-(12-25MM)
Register now and access more than 2,000 products
Standard: DIN 5256
Handle: Plastic-coated
Guarantees a secure grip, prevents slippage
Tip from compressed spring steel
Optimised stability, even with seized rings
Inserted tips
Offers maximum strength when loosening seized rings and allows rings to be installed with minimal distortion.
Screwed and mounted joint
High precision and optimised movement.
Large locating faces
Rings mounted without torsion.
Pliers head
Narrow design for optimum access to workpiece, including in hard-to-reach spots.
Datasheets(X)
Circlip pliers for inner rings.
 | |
Length (L1) | 140 mm |
Min./max. grip range | 12-25 mm |
Jaws length (L2) | 38 mm |
Material | Steel |
Diameter of tenon (D1) | 1.25 mm |
Form | C |
Last viewed
C 6.3 TX bit (1/4 inch)
Hand Sanding Blocks with Extraction
Allen key
Metric double box-end wrench with POWERDRIV®
Flat blunt-ended file DIN 7261, shape A
Pan head tapping screw, C shape with H recessed head DIN 7981, A4 stainless steel, shape C, with tip
Pipe clamp, two-part, with rubber
Screwdriver slotted striking cap with hexagon shank
Twist drill bit HSS DIN 338 type RN 130°
Silicone fluid silicone spray