Clay series cleaning cloth
Towel clay-series
POLPAD-TOWEL-L320-W300MM
Register now and access more than 2,000 products
- Easily removes stubborn residues and dirt from painted surfaces that cannot be removed by conventional cleaning, producing a mirror-like finish.
- Especially gentle cleaning owing to very low heat development and by excluding aggressive cleaning agents.
- Washable and reusable
- Considerable time, energy and cost savings
- Very easy to apply
Never use the Clay cleaning cloth dry.
The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee the consistent quality of our products. We reserve the right to make technical changes and further develop products.
Datasheets(X)
For fast and effortless removal of paint spray mist, resin, tar and insect remains, especially in the detailing of new and used vehicles. Painted surfaces, glass, chrome, etc.
Rinse the area to be cleaned and the cleaning cloth thoroughly with water or PH neutral car shampoo (we recommend highly diluted R1 cleaner art. 0893125005). Then treat the damp surface with the cleaning cloth, without applying pressure. To clean with the cleaning cloth, the surface and the cleaning cloth must always be damp. We recommend moistening the surface and the cleaning cloth with a pressure sprayer as required during the cleaning process. After completing the cleaning process, simply remove any residue with a microfibre cloth. The surface is perfectly prepared for polishing or sealing.
Colour | Black, Red |
Length x width | 320 x 300 mm |
Material | 0 - not applicable |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!
Last viewed
Neutral silicone
Knife blade, L-shaped, toothed
Threaded rod DIN 976-1 (shape A) with standard metric ISO thread, zinc-plated steel 8.8, blue passivated (A2K)
VDE side cutters, DIN ISO 5749 IEC 60900
Twist drill bit HSS DIN 338 type RN 118°
Ear plugs x-200
Premium rim cleaner
Twist drill bit HSS DIN 338 type RN 130°
Vehicle air conditioner cleaner EVAPO® Fresh
Flat washer For hexagon head bolts and nuts