De-waxer

Name: De-waxer
Brand: Würth
SKU: 0890132

Wax remover
WAXREM-20LTR

Art.-no. 0890132

EAN 4057709073206

All versions

Prices for customers after login

De-waxer

Art.-no. 0890132

Prices for customers after login

Quantity

x 1 pcs

Exclusively for trade customers

Login/Register
Call customer service: +94 112 894930

De-waxing agent for waxed commercial vehicles

Extremely high cleaning performance

Removes wax preservatives without a problem

Optimum preparation for work such as painting, priming, coating or printing

Evaporates without residues

Does not cause staining on drying

Does not form an emulsion with water

Does not prevent the use of a light fluid separator (DIN 1999)

Free of AOX and silicone

Notice

Unhardened paints and varnishes can be removed. Check resistance of plastic and rubber parts beforehand. Hazard class/category: Aspiration hazard, category 1.

Do not use water on easily corroding materials.

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications as well as storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by the provision of this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee the consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Würth Catalogue

Datasheets(X)

Certificates/ Documents

Application area

Vehicles, engines, machines, tools, iron, steel, light-alloy and non-ferrous metals, glass and ceramic

Instructions

Spraying, brushing, high-pressure or immersion methods possible. Check type of preservation before use.

Manual:

Apply undiluted to the surfaces to be de-waxed or cleaned. Application time: approx. 1 to 5 minutes. Then rinse thoroughly with hot water.

High-pressure devices:

Spray the de-waxer onto parts to be de-waxed or cleaned with hot water. Application concentration: 5–10% Allow to take effect for approx. 1 to 5 minutes. Then rinse thoroughly with water.

Contents	20 l
Product weight (per item)	15740.000 g
Chemical basis	Naphtha
Smell/fragrance	Mild
Colour	Colourless
Min. flashing point	65 °C
Density/conditions	0.79 g/cm³ / at 20°C
Shelf life from production/conditions	24 Month / at room temperature
AOX-free	Yes
Silicone-free	Yes

Suitable glove:

Product

Description

Nitrile chemical protective glove With cotton velour finish inside

Description:

Permeation level: 6

Nitrile chemical protective glove Long, heavy-duty design

Description:

Permeation level: 6

Disposable nitrile glove, extra strong

Description:

Permeation level: 1

Hard-wearing disposable gloves with excellent chemical protection

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time

Permeation level

< 10 min

≥ 10 min

≥ 30 min

≥ 60 min

≥ 120 min

≥ 240 min

≥ 480 min

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.