Diesel injection cleaner
SYSCLNR-VEH-INJCLNR-DISL-300ML
Prices for customers after login
Register now and access more than 2,000 products
For cleaning the injection pump and nozzle
Neutralises and binds acid condensation water
Improves the cetane number
Reduces fuel-related "knocking"
Synthetic-based active agent concentrate
like those used in national and international diesel fuels.
The usage instructions are recommendations based on the tests we have conducted and based on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.
Würth Catalogue(X)
Datasheets(X)
Once all repairs to the injection system and engine area are complete, add the contents of the can to the tank.
300 ml are sufficient for 30–50 litres of diesel. 1000 ml for 200 litres.
Contents | 300 ml |
Colour | Brown |
Smell/fragrance | Characteristic |
Chemical basis | Hydrocarbon |
Shelf life from production | 24 Month |
Density | 0.845 g/cm³ |
Density conditions | at 20°C |
Min. flashing point | 62 °C |
VDE combination pliers DIN ISO 5746 IEC 60900
Twist drill bit HSS DIN 338 type RN 118°
Cylinder saw, HSS bi-metal Longlife & Speed HSCo8
Halogen bulb Double-Filament
2-CUTTER SDS-PLUS HAMMER DRILL BITS
1/2" socket wrench insert
Circlip pliers Type C
Automatic jump starter
1/2-inch impact socket wrench insert
Twist drill bit HSS DIN 338 type RN 118°
