Digital vernier callipers, fractional
Digital vernier calipers with fraction display
CAL-DGT-(0-150MM)
Register now and access more than 2,000 products
- Measuring unit: Metric or inch
- LCD digital display 9 mm
- Operating temperature 0°C to 40°C
- Battery: 1.5V silver oxide cell (LR44)
- Battery voltage indicator light on the display
- Automatic switch-off / 5 min.
- Stainless steel, hardened and ground
- Measuring surfaces ground and lapped
- With locking screw
- Thread table on the reverse
- Depth gauge on calliper
- Delivery in plastic box
- Battery included
Delivered in plastic box.
Complies with DIN 862
Datasheets(X)
The callipers have two measuring arms on each side for measuring internal and external dimensions. The callipers also have a depth gauge that can be used e.g. for measuring bore holes. The callipers have a table on the reverse for looking up the diameter of core holes in thread cutting.
Absolute length measuring accuracy | 0.03 mm |
Max. length measuring range | 150 mm |
Length of jaw | 40 mm |
Last viewed
VDE snipe nose pliers DIN ISO 5745, IEC 60900
Injectable mortar WIT-PE 500 WIT-PE 500 for concrete and post-installed rebar connection
Brake fluid DOT 4 For hydraulic brake systems
Metric combination wrench with POWERDRIV®
Elbow pipe wrench Swedish form, angled 90°
Windscreen lining tape For window installation
Hand tap, second tap HSS DIN 352
Standard cable tie with plastic latch
Split pin DIN 94, zinc-plated steel, blue passivated (A2K)
Plus Quadro-L Vario hammer drill bit