Hard wax, assortment

Name: Hard wax, assortment
Brand: Würth
SKU: 09648906

Hard wax assortment
RETCHWAX-SORT-HARDWAX-20PCS

Art.-no. 09648906

EAN 4024835074179

All versions

Specification

For filling larger damaged areas on the surface or around edges that are subsequently exposed to major stresses.

High strength

Especially for repairing areas exposed to high loads within the surface area

High abrasion resistance

Large choice of colours

Matching colours for a wide range of different wood colours

Broad range of applications

Colours can be mixed with each other

For optimum adaptation of the colour to the surface

Enables improved matching of wood grains

Inexpensive and simple repair instead of replacement or costly new treatment of the whole surface

Notice

Suitable for indoor use

Please follow the application instructions included with each assortment pack precisely

Please note that wood has a natural colour which is dependent on many different factors (e.g. origin, exact type of tree, surface treatment etc.). Therefore, an inconspicuous touch-up can never be carried out with a single wax colour.

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Application

Application area

For filling deep cracks and scratches, open joints, holes and dents subject to major stresses. Suitable for front, surface and edge areas, as well as table-top surfaces, parquet floors and stair treads etc.

Instructions

Process the damaged area with the heated tip of the gas melter (art. no. 0890 305 3).

Allow the hard wax to cool down and remove excess areas using the plastic plane (art. no. 0890 305 30).

Trace the wood grain with touching-up materials and restore the pore pattern. Finally, seal the site with clear varnish (art. no. 0893 188 2/0893 188 3). For more information, please refer to the technical data sheet.

Technical information

Number of pieces in assortment/set	20 PCS
Min. processing time	3 min
Max. processing time	5 min
Softening point	76 °C
Conditions for softening point	in accordance with ISO 2207
Min. dripping point	81 °C
Dripping point conditions	in accordance with DIN 51801
Min. flashing point	100 °C
Water-soluble	No
Shelf life from production	4 Years
Conditions to maintain shelf life from production	at room temperature

Documents

Product information

Würth Catalogue

Datasheets(X)

Certificates/ Documents

Delivery scope

Hard wax, assortment including:

1 x

Hard wax

RETCHWAX-FUS-WHITE

Description:

Pure white

For filling larger damaged areas on the surface or around edges that are subsequently exposed to major loads.

Quantity: 1 x

1 x

Hard wax

RETCHWAX-FUS-COLOURLESS

Description:

Colourless

For filling larger damaged areas on the surface or around edges that are subsequently exposed to major loads.

Quantity: 1 x

1 x

Hard wax

RETCHWAX-FUS-MAPLE-NATURE

Description:

Maple

For filling larger damaged areas on the surface or around edges that are subsequently exposed to major loads.

Quantity: 1 x

1 x

Hard wax

RETCHWAX-FUS-PINE

Description:

Pine

For filling larger damaged areas on the surface or around edges that are subsequently exposed to major loads.

Quantity: 1 x

1 x

Hard wax

RETCHWAX-FUS-MAPLE-MIDDLE

Description:

Maple

For filling larger damaged areas on the surface or around edges that are subsequently exposed to major loads.

Quantity: 1 x

1 x

Hard wax

RETCHWAX-FUS-BEECH-MIDDLE

Description:

Beech, middle

For filling larger damaged areas on the surface or around edges that are subsequently exposed to major loads.

Quantity: 1 x

1 x

Hard wax

RETCHWAX-FUS-SEN-ASH

Description:

Ash

For filling larger damaged areas on the surface or around edges that are subsequently exposed to major loads.

Quantity: 1 x

1 x

Hard wax

RETCHWAX-FUS-ALDER-MIDDLE

Description:

Alder, medium

For filling larger damaged areas on the surface or around edges that are subsequently exposed to major loads.

Quantity: 1 x

1 x

Hard wax

RETCHWAX-FUS-BEECH-DARK

Description:

Beech, dark

For filling larger damaged areas on the surface or around edges that are subsequently exposed to major loads.

Quantity: 1 x

1 x

Hard wax

RETCHWAX-FUS-OAK-BRIGHT

Description:

Oak bright

For filling larger damaged areas on the surface or around edges that are subsequently exposed to major loads.

Quantity: 1 x

1 x

Hard wax

RETCHWAX-FUS-CHERRYTREE-MIDDLE

Description:

Cherry tree

For filling larger damaged areas on the surface or around edges that are subsequently exposed to major loads.

Quantity: 1 x

1 x

Hard wax

RETCHWAX-FUS-PEARTREE-MIDDLE

Description:

Pear, middle

For filling larger damaged areas on the surface or around edges that are subsequently exposed to major loads.

Quantity: 1 x

1 x

Hard wax

RETCHWAX-FUS-PEARTREE-DARK

Description:

Pear, dark

For filling larger damaged areas on the surface or around edges that are subsequently exposed to major loads.

Quantity: 1 x

1 x

Hard wax

RETCHWAX-FUS-RUSTIC-OAK

Description:

Oak, rustic

For filling larger damaged areas on the surface or around edges that are subsequently exposed to major loads.

Quantity: 1 x

1 x

Hard wax

RETCHWAX-FUS-OAK-DARK

Description:

Oak, dark

For filling larger damaged areas on the surface or around edges that are subsequently exposed to major loads.

Quantity: 1 x

1 x

Hard wax

RETCHWAX-FUS-BROWN

Description:

Brown

For filling larger damaged areas on the surface or around edges that are subsequently exposed to major loads.

Quantity: 1 x

1 x

Hard wax

RETCHWAX-FUS-WALNUT-MIDDLE

Description:

Walnut, medium

For filling larger damaged areas on the surface or around edges that are subsequently exposed to major loads.

Quantity: 1 x

1 x

Hard wax

RETCHWAX-FUS-MAHOGANY-BROWN

Description:

Mahogany

For filling larger damaged areas on the surface or around edges that are subsequently exposed to major loads.

Quantity: 1 x

1 x

Hard wax

RETCHWAX-FUS-BOG-OAK

Description:

Bog oak

For filling larger damaged areas on the surface or around edges that are subsequently exposed to major loads.

Quantity: 1 x

1 x

Hard wax

RETCHWAX-FUS-DEEP-BLACK

Description:

Jet black, similar to RAL 9005

For filling larger damaged areas on the surface or around edges that are subsequently exposed to major loads.

Quantity: 1 x

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with v

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).