Heavy-duty anchor W-TM type S with hexagon head bolt and washer - ANC-(W-TM/S-S)-(A2K)-M8X65/14

Heavy-duty anchor W-TM type S with hexagon head bolt and washer

Name: Heavy-duty anchor W-TM type S with hexagon head bolt and washer
Brand: Würth
SKU: 0904901861

Heavy-duty anchor W-TM type S steel zinc plated
ANC-(W-TM/S-S)-(A2K)-M8X65/14

Art.-no. 0904901861

EAN 4045989060733

All versions

Prices for customers after login

Heavy-duty anchor W-TM type S with hexagon head bolt and washer

Art.-no. 0904901861

Prices for customers after login

Quantity

x 50 pcs

Exclusively for trade customers

Login/Register
Call customer service: +94 112 894930

ETA-10/0255 for individual attachment, Option 7, non-cracked concrete, galvanised steel, M6–M12; dimensioned in accordance with the European Technical Approval Guidelines (ETAG) for "Metal Anchors for Use in Concrete", Appendix C, measurement process A

Product information

Würth Catalogue

Datasheets(X)

Certificates/ Documents


Anchor diameter	8 mm
Anchor length (l)	51 mm
Max. attachment height (t fix)	14 mm
Nominal drill-bit diameter (d 0)	12 mm
Drill hole depth (h 1)	61 mm
Effective anchoring depth (h ef)	44.5 mm
Through-hole in the component to be connected (d f)	9 mm
Width across flats	13 mm
Material	Steel
Surface	Zinc plated
Screw length	65 mm

Performance data
Anchor diameter [mm]			M6	M8	M10	M12
Admissible centric tension load¹⁾ on an individual anchor without influence of the edge distance type A + type S	Compressive zone (uncracked concrete C20/25²⁾), s ≥ 3 h_ef, c ≥ 1.5 h_ef	N_adm [kN] = C20/25²⁾	3,6	4,1	5,4	9,5
Admissible shear load¹⁾ on an individual anchor without influence of the edge distance type A + type S	Compressive zone (uncracked concrete C20/25²⁾), s ≥ 3 h_ef, c ≥ 1.5 h_ef	V_adm[kN] = C20/25²⁾	4,6	7,1	8,9	19,3
Admissible bending moment type A + type S		M_adm [Nm]	7,0	17,1	34,2	59,9
¹⁾ The partial safety factors of the resistances regulated in the approval and a partial safety factor of the actions of Y_F = 1.4 have been taken into account. Please refer to the European Technical Approval Guidelines (ETAG), Appendix C, for information on combining tensile and transverse loads, edge influence and groups of anchors. ²⁾The concrete has normal reinforcement. Higher values are possible for higher concrete compressive strengths. ³⁾ Compliant with approval if screws and threaded rods with acceptance test certificate 3.1 in accordance with EN 10204:2004 are proven to be the required material and to possess the mechanical properties stipulated in ETA-10/0255. ⁴⁾ Type S: If a lower fixture thickness is required, make a deeper drill hole accordingly.

Characteristic values
Minimum member thickness	h_min ≥ [mm]	135	135	140	160
Minimum spacing	s_min ≥ [mm]	65	90	135	165
Minimum edge distance	c_min ≥ [mm]	45	70	85	115
Spacing	s_cr,N [mm]	119	134	155	189
Edge distance	c_cr,N [mm]	60	67	78	95
Effective anchorage depth	h_ef [mm]	39,5	44,5	51,5	63,0
Nominal drill diameter	d₀ [mm]	10	12	14	18
Diameter of cutting edges	d_cut ≤ [mm]	10,45	12,5	14,5	18,5