Oil Leak and Smoke Stop
ADD-ENGCLNR-INTERI-OIL-SMOKE-STOP-300ML
Register now and access more than 2,000 products
- Reduces oil consumption by stabilising the viscosity and compensates viscosity losses. Helps prevent blue exhaust smoke.
- The full 300 ml can is sufficient for 5 l of oil
Not suitable for use in motorcycles or quad bikes with wet clutches.
The usage instructions are recommendations based on the tests we have conducted and our experience. Carry out your own tests before each application. Due to the large number of applications as well as storage and usage conditions, we do not assume any liability for a specific application result. Any technical information or advice provided by our free customer service shall be provided to the exclusion of any liability, unless the advice or information is part of our contractually agreed scope of services or the advisor was acting wilfully. We ensure the consistent quality of our products. We reserve the right to make technical changes and further developments to our products.
Datasheets(X)
For use in all petrol and diesel engines. Compatible with all standard engine oils.
After adding to the engine oil, let the engine run until it is warm. The product can be added at any time.
Contents | 300 ml |
Colour | Light brown |
Smell/fragrance | Characteristic |
Chemical basis | Combination of additives |
Shelf life from production | 60 Month |
Density | 0.893 g/cm³ |
Density conditions | at 20°C |
Min. flashing point | 101 °C |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!
Last viewed
Sealing ring, copper, shape A
Three-way nozzle
Refuse bag Without pull tie
Multi-purpose lubricant Ultra 2040
1" slider with pin detent
Unprinted motorcycle advertising panel
L-shaped key TX, short version
Suction filter assortment
Pressure sprayer Solvent-resistant
Combination hammer BMH 40 V-CLASSIC